Optimization of Empirical Modelling of Advanced Highly Strained In0.7Ga0.3As/In0.52Al0.48As pHEMTs for Low Noise Amplifier
نویسنده
چکیده
Received May 19, 2017 Revised Nov 14, 2017 Accepted Nov 16, 2017 An optimized empirical modelling for a 0.25μm gate length of highly strained channel of an InP-based pseudomorphic high electron mobility transistor (pHEMT) using InGaAs–InAlAs material systems is presented. An accurate procedure for extraction is described and tested using the pHEMT measured dataset of I-V characteristics and related multi-bias s-parameters over 20GHz frequency range. The extraction of linear and nonlinear parameters from the small signal and large signal pHEMT equivalent model are performed in ADS. The optimized DC and S-parameter model for the pHEMT device provides a basis for active device selection in the MMIC low noise amplifier circuit designs. Keyword:
منابع مشابه
50-nm E-mode In0.7Ga0.3As PHEMTs on 100-mm InP substrate with fmax > 1 THz
Abstract We have demonstrated 50-nm enhancement-mode (E-mode) In0.7Ga0.3As PHEMTs with fmax in excess of 1 THz. The devices feature a Pt gate sinking process to effectively thin down the In0.52Al0.48As barrier layer, together with a two-step recess process. The fabricated device with Lg = 50-nm exhibits VT = 0.1 V, gm,max = 1.75 mS/μm, fT = 465 GHz and fmax = 1.06 THz at a moderate value of VDS...
متن کاملA Novel Resistive Capacitive Feedback Trans-impedance Amplifier Optimization Using IPSO Algorithm
A novel low noise trans-impedance amplifier is proposed using low cost 0.18 µm CMOS technology. A resistive-capacitive feedback is used to extend the bandwidth of the amplifier. As the structure is inductor less, it is suitable for low cost integrated optical interconnects. In this paper Improved Particle Swarm Optimization have applied to determine optimal trans-resistance and noise of propose...
متن کامل50-nm E-mode In[subscript 0.7]ga[subscript 0.3]as Phemts on 100-mm Inp Substrate with F[subscript Max] > 1 Thz Accessed Terms of Use Detailed Terms 50-nm E-mode in 0.7 Ga 0.3 as Phemts on 100-mm Inp Substrate with F Max > 1 Thz
We have demonstrated 50-nm enhancement-mode (E-mode) In0.7Ga0.3As PHEMTs with fmax in excess of 1 THz. The devices feature a Pt gate sinking process to effectively thin down the In0.52Al0.48As barrier layer, together with a two-step recess process. The fabricated device with Lg = 50-nm exhibits VT = 0.1 V, gm,max = 1.75 mS/μm, fT = 465 GHz and fmax = 1.06 THz at a moderate value of VDS = 0.75 V...
متن کاملHot Phonons in a Biased Two-Dimensional InGaAs Channel
Experimental dependence of microwave noise temperature on supplied electric power is used to estimate hot-phonon number in a modulation-doped In0.52Al0.48As/In0.53Ga0.47As/In0.7Ga0.3As/In0.52Al0.48As two-dimensional electron gas channel (n2D = 2.3×10 cm−2). The nonequilibrium occupancy of the involved longitudinal optical phonon states exceeds the equilibrium one nearly twice at 2 kV/cm electri...
متن کاملAdvanced High-K Gate Dielectric for High-Performance Short-Channel In0.7Ga0.3As Quantum Well Field Effect Transistors on Silicon Substrate for Low Power Logic Applications
This paper describes integration of an advanced composite high-K gate stack (4nm TaSiOx-2nm InP) in the In0.7Ga0.3As quantum-well field effect transistor (QWFET) on silicon substrate. The composite high-K gate stack enables both (i) thin electrical oxide thickness (tOXE) and low gate leakage (JG) and (ii) effective carrier confinement and high effective carrier velocity (Veff) in the QW channel...
متن کامل