Evaluation of Compression Testing and Compression Failure Modes of Paperboard
نویسنده
چکیده
منابع مشابه
Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression
Delamination is one of the most common failure modes in composite structures. In the case of in-plane compressional loading, delamination of a layered flat structure can cause a local buckling in delaminated area which subsequently affects the overall stiffness of the initial structure. This leads to an early failure of the overall structure. Moreover, with an increase in load, the delaminated ...
متن کاملDevelopment of a compression system dynamic simulation code for testing and designing of anti-surge control system
In recent years, several research activities have been conducted to develop knowledge in analysis, design and optimization of compressor anti-surge control system. Since the anti-surge control testing on a full-scale compressor is limited to possible consequences of failure, and also the experimental facility can be expensive to set up control strategies and logic, design process often involves...
متن کاملNumerical and Experimental Investigation of the Strength of Corrugated Board Packages
Goods that are shipped world-wide travel protected by packages that are frequently made of corrugated board. Therefore, the strength of corrugated board containers is crucial for preserving the content, while an optimization of corrugated board containers is essential to save money and resources. Unfortunately, standard compression tests show a wide dispersion in container performance, and so, ...
متن کاملExperimental Analysis of Crashworthiness Behavior of Energy Absorber Tubes Under 3D Oblique Load
Actual applications of the energy absorbers showed that actual loads are not applied in the form of pure axial compression, pure bending or pure torsion. In reality, an energy absorber component may be subjected to combined loading of compression, bending and torsion. A number of previous articles have investigated the behavior of energy absorbers under oblique loading. In such cases, the obliq...
متن کاملBuckling and failure characteristics of slender web I-column girders under interactive compression and shear
Geometric and material nonlinear behavior of slender webs in I-column girders having stocky flanges under the action of combined lateral and axial loads is investigated. Interaction curves corresponding to the application of compressive and shear loads at buckling and ultimate stages for both web plates and column sections are plotted. In addition, the effects of flange and web slenderness rati...
متن کامل