Vision Metrology and Three Dimensional Visualization in Structural Testing and Monitoring
نویسنده
چکیده
This paper describes initial work carried out to advance the use of vision metrology and three dimensional visualization techniques in structural testing and monitoring. A description is given of a methodology for semi-automatically generating dynamic three dimensional computer graphics models, which is employed to provide a three dimensional spatial framework for conventional engineering instrumentation. The use of techniques developed for two structural measurement applications is explained and opportunities for current and future research are reported.
منابع مشابه
Deformation Monitoring of a Slope by Vision Metrology
This paper discusses monitoring of slope deformations by vision metrology with a CCD camera. Reflective targets are placed over a slope, and their object coordinates is measured by a photogrammetric technique. Precision and sensitivity of slope deformation measurement using vision metrology are investigated. Deformation of targets placed on a slope was detected by measurement at two time epochs...
متن کاملMeasurement of Structural Deformation using Terrestrial Laser Scanners
Three deformation measurement experiments have been undertaken where, in each experiment, a structure was subject to controlled loading. Terrestrial laser scanners (TLSs) were used to make measurements at critical intervals during each load test. TLSs, which are a relatively recent innovation, are capable of rapidly capturing thousands of three dimensional points over the surface of an object. ...
متن کاملجانمایی دوربین در طراحی شبکههای فتوگرامتری صنعتی با استفاده از بهینهسازی تکاملی چندگانه
Nowadays, the subject of vision metrology network design is local enhancement of the existing network. In the other words, it has changed from first to third order design concept. To improve the network, locally, some new camera stations should be added to the network in drawback areas. The accuracy of weak points is enhanced by the new images, if the related vision constraints are satisfied si...
متن کاملHealth Monitoring of Welded Steel Pipes by Vibration Analysis
In the present work, structure health monitoring (SHM) of welded steel pipes was used to diagnosis their state via vibration based damage detection techniques. The dynamic quantities such as Frequency Response Functions (FRFs), mode shapes and modal parameters from structural vibration to detect damage were measured, set on linear averaging mode, with a maximum frequency of analysis of 3.2 kHz....
متن کاملMobile Calibration Based on Laser Metrology and Approximation Networks
A mobile calibration technique for three-dimensional vision is presented. In this method, vision parameters are computed automatically by approximation networks built based on the position of a camera and image processing of a laser line. The networks also perform three-dimensional visualization. In the proposed system, the setup geometry can be modified online, whereby an online re-calibration...
متن کامل