Vibration Isolation using a Shunted Electromagnetic Transducer
نویسندگان
چکیده
By attaching an electromagnetic transducer to a mechanical isolation system and shunting the terminals of the transducer with electrical impedance, we can provide improved isolation performance while eliminating the need for an additional sensor. Simulated and experimental results on a simple electro-mechanical isolation system show that the proposed controller is capable of peak damping and high frequency attenuation.
منابع مشابه
Control Orientated Synthesis of Electromagnetic Shunt Impedances for Vibration Isolation
A typical passive mechanical isolation system utilizes a mass-spring-damper as a mechanical filter. Active isolation control systems typically include an electromagnetic transducer to develop the required control forces. In this paper, the technique of sensor-less active shunt control is applied to a mechanical isolation system. An electrical impedance is designed and connected to an electromag...
متن کاملA survey of recent innovations in vibration damping and control using shunted piezoelectric transducers
Research on shunted piezoelectric transducers, performed mainly over the past decade, has generated new opportunities for control of vibration and damping in flexible structures. This is made possible by the strong electromechanical coupling associated with modern piezoelectric transducers. In vibration control applications, a piezoelectric transducer is bonded to, or embedded in a base structu...
متن کاملAn electromagnetic inerter-based vibration suppression device
This paper describes how an inerter-based device for structural vibration suppression can be realized using an electromagnetic transducer such as a linear motor. When the motor shaft moves, a difference of voltage is generated across the transducer coil. The voltage difference is proportional to the relative velocity between its two terminals. The electromagnetic transducer will exert a force p...
متن کاملDesign and Fabrication of a Longitudinal-Torsional Ultrasonic Transducer
A hybrid longitudinal-torsional ultrasonic transducer is designed and fabricated in this research. The design of the transducer was performed using the FE method with ABAQUS software, with the aim of combining the longitudinal and torsional vibration modes. The transducer horn is then fabricated using a 4-axis milling machine. The PZT stacks are employed in order to excite the transducer. The t...
متن کاملDecentralized control for multichannel active vibration isolation
This paper describes a theoretical and experimental investigation into an active four-mount vibration isolation system, in which electromagnetic actuators are installed in parallel with each of the four passive mounts placed between a three-dimensional piece of equipment and a vibrating base structure. Decentralized velocity feedback control is applied, where each actuator is operated independe...
متن کامل