Efficient perovskite solar cells based on low-temperature solution-processed (CH3NH3)PbI3 perovskite/CuInS2 planar heterojunctions
نویسندگان
چکیده
In this work, the solution-processed CH3NH3PbI3 perovskite/copper indium disulfide (CuInS2) planar heterojunction solar cells with Al2O3 as a scaffold were fabricated at a temperature as low as 250°C for the first time, in which the indium tin oxide (ITO)-coated glass instead of the fluorine-doped tin oxide (FTO)-coated glass was used as the light-incidence electrode and the solution-processed CuInS2 layer was prepared to replace the commonly used TiO2 layer in previously reported perovskite-based solar cells. The influence of the thickness of the as-prepared CuInS2 film on the performance of the ITO/CuInS2(n)/Al2O3/(CH3NH3)PbI3/Ag cells was investigated. The ITO/CuInS2(2)/Al2O3/(CH3NH3)PbI3/Ag cell showed the best performance and achieved power conversion efficiency up to 5.30%.
منابع مشابه
Hole-transport materials with greatly-differing redox potentials give efficient TiO2-[CH3NH3][PbX3] perovskite solar cells.
Two diacetylide-triphenylamine hole-transport materials (HTM) with varying redox potential have been applied in planar junction TiO2-[CH3NH3]PbI3-xClx solar cells leading to high power-conversion efficiencies up to 8.8%. More positive oxidation potential of the HTM gives higher VOC and lower JSC illustrating the role of matching energy levels, however both HTMs gave efficient cells despite a di...
متن کاملHigh-performance hole-extraction layer of sol-gel-processed NiO nanocrystals for inverted planar perovskite solar cells.
Hybrid organic/inorganic perovskite solar cells have been rapidly evolving with spectacular successes in both nanostructured and thin-film versions. Herein, we report the use of a simple sol-gel-processed NiO nanocrystal (NC) layer as the hole-transport layer in an inverted perovskite solar cell. The thin NiO NC film with a faceted and corrugated surface enabled the formation of a continuous an...
متن کاملLow Temperature Solution-Processed Sb:SnO2 Nanocrystals for Efficient Planar Perovskite Solar Cells.
Inorganic metal oxide electron-transport layers (ETLs) have the potential to yield perovskite solar cells with improved stability, but generally need high temperature to form conductive and defect-less forms, which is not compatible with the fabrication of flexible and tandem solar cells. Here, we demonstrate a facile strategy for developing efficient inorganic ETLs by doping SnO2 nanocrystals ...
متن کاملSolid state transformation of the crystalline monohydrate (CH3NH3)PbI3(H2O) to the (CH3NH3)PbI3 perovskite.
Colorless crystals of (CH3NH3·H2O)PbI3 spontaneously lose water at 298 K which triggers a transformation to the black (CH3NH3)PbI3 perovskite in the solid state as a porous microcrystalline solid with nanoscale substructure, but the dihydrate (CH3NH3)4PbI6·2H2O) requires much more forcing conditions to produce (CH3NH3)PbI3.
متن کاملThermally Activated Exciton Dissociation and Recombination Control the Carrier Dynamics in Organometal Halide Perovskite.
Solar cells based on organometal halide perovskites have seen rapidly increasing efficiencies, now exceeding 15%. Despite this progress, there is still limited knowledge on the fundamental photophysics. Here we use microwave photoconductance and photoluminescence measurements to investigate the temperature dependence of the carrier generation, mobility, and recombination in (CH3NH3)PbI3. At tem...
متن کامل