Magnet-retained auricular prosthesis with an implant-supported composite bar: a clinical report.
نویسندگان
چکیده
The use of craniofacial implants to assist in retaining auricular prostheses often requires complex laboratory procedures, involving production of an accurate casting, fitting of a precious alloy bar, and the use of clips. A simplified method for the retention of an auricular prosthesis with a composite bar and magnets is described in this article.
منابع مشابه
Implant-Retained Auricular Prosthesis: A Case Report
Extraoral implant retained prosthesis have been proven to be a predictable treatment option for maxillofacial rehabilitation. This case report describes the clinical and laboratory procedures for fabricating an auricular prosthesis.In this case report, an auricular prosthesis was fabricated for a patient who lost the left and right external ear in an electrical burn. Extraoral implants and bar-...
متن کاملRehabilitation of a missing ear with an implant retained auricular prosthesis.
Burns can leave a patient with a severely debilitating disability even after treatment. The objectives of burn rehabilitation are to minimize the adverse effects caused by the injury while rehabilitating the patient's physical and psychological well-being, maximizing social integration. Long-term success of maxillofacial prostheses mainly depends on the retention. Extra oral implant retained pr...
متن کاملMagnetic retention and bar-clip attachment for implant-retained auricular prostheses: a comparative analysis.
Retention systems for implant-retained auricular prostheses using either bar-clip attachments with 2 or 3 clips or retention with 2 or 3 magnets were wear tested (insertion and removal cycles) to simulate clinical periods of use. Measurements were taken at intervals of 540 cycles, which represents a period of use of approximately 6 months, for up to 3,240 cycles. Assessments of retentive force ...
متن کاملUse of an Implant O-Ring Attachment for the Tooth Supported Mandibular Overdenture: A Clinical Report
Retention of a mandibular denture can be achieved by an implant-retained or natural tooth-retained bar and stud attachment in the anterior segment of the mandible. The same design principles holds true for both implant-retained and tooth-retained methods of anchoring the bar and stud attachment. A simple and cost effective treatment for more complex implant overdenture is the concept of convent...
متن کاملFabricating CAD/CAM Implant-Retained Mandibular Bar Overdentures: A Clinical and Technical Overview
This report describes the clinical and technical aspects in the oral rehabilitation of an edentulous patient with knife-edge ridge at the mandibular anterior edentulous region, using implant-retained overdentures. The application of computer-aided design and computer-aided manufacturing (CAD/CAM) in the fabrication of the overdenture framework simplifies the laboratory process of the implant pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Journal of prosthetic dentistry
دوره 89 5 شماره
صفحات -
تاریخ انتشار 2003