Erratum: Griffiths phase behaviour in a frustrated antiferromagnetic intermetallic compound

نویسندگان

  • Krishanu Ghosh
  • Chandan Mazumdar
  • R. Ranganathan
  • S. Mukherjee
چکیده

Erratum: Griffiths phase behaviour in a frustrated antiferromagnetic intermetallic compound Krishanu Ghosh, Chandan Mazumdar, R. Ranganathan & S. Mukherjee Scientific Reports 5:15801; doi: 10.1038/srep15801; published online 30 October 2015; updated on 02 February 2016 This Article contains errors in Figure 4 and Figure 5. In Figure 4, the y-axis ‘M (μ B/f.u.)’ was incorrectly given as ‘M(·B/f.u.)’. In Figure 5, the y-axis ‘− Δ SM (10−3Jule/ Kg.K)’ was incorrectly given as ‘− ·SM (10−3Jule/Kg.K)’. The correct Figure 4 and Figure 5 appear below as Figures 1 and 2 respectively. OPEN

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Griffiths phase behaviour in a frustrated antiferromagnetic intermetallic compound

The rare coexistence of a Griffiths phase (GP) and a geometrically frustrated antiferromagnetism in the non-stoichiometric intermetallic compound GdFe0.17Sn2 (the paramagnetic Weiss temperature θp ~ -59 K) is reported in this work. The compound forms in the Cmcm space group with large structural anisotropy (b/c ~ 4). Interestingly, all the atoms in the unit cell possess the same point group sym...

متن کامل

Tribological Behaviour of Fe-Al Intermetallic Compound Coated Carbon Tool Steel

The use of Fe-Al intermetallic compound coatings has been investigated in order to improve the tribological behaviour of carbon tool steel. The coatings were formed by a pack cementation process and subsequently diffusion annealing at 900˚C in an argon controlled atmosphere. The optimum diffusion time was selected on the basis of optimum thickness and tribological behaviour. The microstructure...

متن کامل

Tribological Behaviour of Fe-Al Intermetallic Compound Coated Carbon Tool Steel

The use of Fe-Al intermetallic compound coatings has been investigated in order to improve the tribological behaviour of carbon tool steel. The coatings were formed by a pack cementation process and subsequently diffusion annealing at 900˚C in an argon controlled atmosphere. The optimum diffusion time was selected on the basis of optimum thickness and tribological behaviour.&#10The microstructu...

متن کامل

Effect of Welding Heat Input on the Intermetallic Compound Layer and Mechanical Properties in Arc Welding-brazing Dissimilar Joining of Aluminum Alloy to Galvanized Steel

The effect of weld heat input on the formation of intermetallic compound (IMCs) layer during arc welding–brazing of aluminium and steel dissimilar alloys, was investigated through both finite element method (FEM) numerical simulations and experimental measurements. The results of FEM analysis as well as welding experiments indicated that increasing weld heat input increases the thickness of IMC...

متن کامل

EFFECT OF COMPOSITION ON THE MAGNETIC BEHAVIOUR OF Gd2X COMPOUND

The eigenvalues of the isotropic magnetic interaction system extraction from Internal Field Approximation (IFA) q e computed. on the basis of RKKY for the complicated magnetic behaviour of Gd, X system X= (Au , Pt , Al , In ) as well as Gd. From the strength and slope of eigenvalue curves in different ranges of interaction the strength and sharpness of the magnetic transition can be suggest...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2016