Distance Remote Measurement of Magnetic Field
نویسندگان
چکیده
Ján MOLNÁR, Irena KOVÁČOVÁ Department of Theoretical Electrical Engineering and Electrical Measurement, Faculty of Electrical Engineering and Informatics, Technical University of Košice, Letná 9, 042 00 Košice, E-mail: [email protected] Department of Electrical Engineering, Mechatronics and Industrial Engineering, Faculty of Electrical Engineering and Informatics, Technical University of Košice, Letná 9, 042 00 Košice, E-mail: [email protected]
منابع مشابه
Measurement and simulation of magnetic field strenght in the nano magnetic abrasive finishing process
Magnetic abrasive finishing can be classified as a non-traditional super finishing method for finishing surfaces with different shapes and working materials like flat plates, shafts, bearings parts, screws, tubes and many other mechanical parts that need good surface finishing properties. MAF is effective in polishing, cleaning, deburring and burnishing metal parts. The most important parameter...
متن کاملMeasurement of the Earth’s Magnetic Field Vector based on zero field finding algorithm using optically pumped magnetometers
Atomic magnetometers have found widespread applications in precise measurement of the Earth’s magnetic field due to their high sensitivity. In these measurements, various methods have been utilized to compensate the Earth’s magnetic field in an unshielded environment. In this paper, we have proposed a method based on finding the minimum resonance frequency (corresponding to minimum magnetic fie...
متن کاملFabrication of New 3D Phantom for the measurement of Geometric Distortion in Magnetic Resonance Imaging System
Introduction: Geometric distortion, an important parameter in neurology and oncology. The current study aimed to design and construct a new three-dimensional (3D) phantom using a 3D printer in order to measure geometric distortion and its 3D reproducibility. Material and Methods: In this study, a new phantom ...
متن کاملSimultaneous remote electric and magnetic field measurements of lightning continuing currents
[1] Remote detection and measurement of the slowly varying continuing current that follows some lightning return strokes is difficult. Slow changes in quasi-static electric fields have been most frequently used to remotely measure continuing current. Because of the rapid attenuation of dipole electric fields with distance, though, the range over which the current will produce a measurable signa...
متن کاملComparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes
In this investigation, the material removal rate, tool wear rate and surface integrity obtained by EDM, ultrasonic vibrations assisted EDM and magnetic field assisted EDM were studied and compared with together to show the quality of the effects of applying each of ultrasonic vibrations to tool and magnetic field around gap distance of EDM process on material removal rate, tool wear rate, and s...
متن کاملMeasurement of the Magnetic Fields from High-Voltage (230 kV) Substations in Tehran and Assessment of Their Effects
Introduction: Recent industrial developments in human societies have caused rapid advancements in technologies of production and distribution of electricity, which in turn result in enhancement of power networks and utilization of high voltages. These networks and the high voltages in transfer lines cause the exposure to electric and magnetic fields. In this study, the situation regarding the m...
متن کامل