Design and Analysis of a Packet Concentrator
نویسنده
چکیده
Packet concentrators are used in many highspeed computer communication systems such as fast packet switches. In these systems, the time available for concentration is very short. It is therefore desirable to realize the packet concentrators as hardware chips for fast concentration. The knockout concentrator was proposed for hardware realization. In this paper, we improve this concentrator to reduce the probability of packet loss, and the improved concentrator is called wraparound knockout concentrator. This concentrator has several wraparound paths within it, and it does not require any additional pin per chip. After contention among the packets in a slot, each winner goes to a distinct output, some losers circulate along the wraparound paths for contention in the subsequent slot, and the remaining losers are discarded. In this manner, some losers are not discarded immediately and they still have the chance to go to the outputs in the subsequent slot, thereby reducing the probability of packet loss. We analyze the number of logic gates required and the probability of packet loss. The numerical results show that if the proposed concentrator has a few wraparound paths, the probability of packet loss can already be reduced by orders of magnitude. key words: computer communication systems, switches, con-
منابع مشابه
Packet Loss in Bipartite Packet Concentrators
In this paper, we consider packet switching problems in bipartite concentrators under the assumption that more than one packet/slot can be processed through a fabric crosspoint. We use three packet-processing models to derive the packet loss and throughput in a bipartite concentrator. The following paper is an extended summary which presents the models and main results. We expect to provide a m...
متن کاملPerformance of Input-Queued Sparse-Crossbar Packet Concentrators
Packet concentrators are used in shared-memory and knockout switches to select and route packets into individual outputs. Recently, a switch model was introduced to investigate the intrinsic relationship between the switching complexity and traffic characteristics of packet concentrators. Using this model, it was shown that any bipartite packet concentrator with n inputs, m outputs and peak per...
متن کاملRouting on Input Queued Buffered Sparse-Crossbar Packet Concentrators
In this paper we characterize the features of good packet routing schemes for input queued sparse crossbar based packet concentrators and propose a polling based routing algorithm which achieves near optimal performance. It has been shown by the authors of this paper that the performance of an input queued packet concentrator with different input and output packet rates can be modeled by a GI/D...
متن کاملDesign and Verification of an ATM Knockout Switch Concentrator
In this paper we describe the design and verification of the concentrator of a Knockout ATM (Asynchronous Transfer Mode) switch fabric using the VIS tool. The Knockout is a popular ATM switch fabric which has application in both datagram and virtual circuit packet networks. The concentrator is the most difficult component in the Knockout ATM switch fabric. We developed an RTL structural design ...
متن کاملDesign of Arrayed Waveguide Grating based Optical Switch for High Speed Optical Networks
This paper demonstrates the design of an Arrayed Waveguide Gratings (AWG) based optical switch. In the design both physical and network layer analysis is performed. The physical layer power and noise analysis is done to obtain Bit Error Rate (BER). This has been found that at the higher bit rates, BER is not affected with number of buffer modules. Network layer analysis is done to obtain perfor...
متن کامل