Thermal Sensitive Shape Memory Behavior of Epoxy Composites Reinforced with Silicon Carbide Whiskers
نویسندگان
چکیده
A novel shape memory polymer composite was fabricated by introducing various amounts of silicon carbide whiskers (SiCws) into a shape memory epoxy. The relationship between the thermomechanical properties of the system and structural changes were investigated via dynamic mechanical analysis, scanning electron microscopy, and bending tests. The results show that the bend strength of composites can improve by 64.1% when SiCw content reaches 12 wt %. The shape transition temperatures of SiCw/epoxy composites decreased slightly with the increase in SiCw content, but it was noted that all of the composites showed excellent shape memory properties. The shape fixity ratio increased as SiCw content increased (>99%), and the shape recovery ratio slightly decreased as SiCw content increased (>95%). All of the composites nearly recovered to their original shape within 2 min (not 100%), and the shape recovery speed significantly improved at a higher temperature. It is anticipated that tagging products will be used in the aerospace industry.
منابع مشابه
Compression Analysis of Hollow Cylinder Basalt Continuous Filament Epoxy Composite Filled with Shape Memory Wire
This paper presents an experimental investigation into the compression behavior of shape memory alloy hybrid composites (SMAHC) subjected to quasi-static loading taking into account of rotation effects of shape memory wire in basalt continuous filament (BCF) direct roving epoxy composite. Two types of specimen prepared, the BCF direct roving reinforced epoxy composite filled with shape memory w...
متن کاملStrengthening and stiffening carbon fiber epoxy composites by halloysite nanotubes, carbon nanotubes and silicon carbide whiskers
متن کامل
STRENGTH AND FRACTURE TOUGHNESS OF WHISKER REINFORCED DENTAL RESIN-BASED COMPOSITES
Enhancing the properties of dental resin composites is of interest to researchers. The objective of the present investigation was to improve the strength and fracture toughness of dental composites via addition of silicon carbide whiskers and substitution of commonly used filler materials with stabilized zirconia ceramic powder. It was also intended to study the effect of powder- to- whisker ra...
متن کاملEvaluation of Thermal Properties of E-Glass/ Epoxy Composites Filled By Different Filler Materials
This paper compares the values of the thermal and fire resistance properties of composites made using the hand layup technique. E-Glass fiber reinforced epoxy composites was fabricated by filling varying concentration of aluminum oxide (Al2O3), magnesium hydroxide(Mg(OH)2), silicon carbide (SiC), and hematite powder. The main aim of this work was to determine the thermal conductivity, thermal e...
متن کاملNonlinear Thermo-Mechanical Behaviour Analysis of Activated Composites With Shape Memory Alloy Fibres
General thermo-mechanical behavior of composites reinforced by shape memory alloy fibers is predicted using a three-dimensional analytical micromechanical method to consider the effect of fibers activation. Composite due to the micromechanical method can be exposed to general normal and shear mechanical and thermal loading which cause to activate the shape memory alloy fibers within polymeric m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017