Engineering Functions into Platinum and Platinum–Rhodium Nanoparticles in a One‐Step Microwave Irradiation Synthesis
نویسندگان
چکیده
Platinum (Pt) and platinum-rhodium (PtRh) nanoparticles (NPs) are active catalysts for a range of important industrial reactions, and their response has been shown to be affected by size, morphology, composition, and architectural configuration. We report herein the engineering of these functionalities into NPs by suitably modifying our single-step fabrication process by using microwave irradiation dielectric heating. NPs with different morphologies are acquired by manipulating the reaction kinetics with the concentration of the capping agent while keeping the reaction time constant. Pt@Rh core@shell octopod-cube, Pt-truncated-cube, and cube and small-sphere NPs having "near-monodisperse" distributions and average sizes in the range of 4 to 18 nm are obtained. By increasing the microwave time the composition of Pt@Rh can be tuned, and NPs with a Rh-rich shell and a tunable Pt100-x Rh x (x≤41 at %) core are fabricated. Finally, alloy bimetallic PtRh NPs with controlled composition are designed by simultaneous tuning of the relative molar ratio of the metal precursors and the microwave irradiation time.
منابع مشابه
A green approach to the facile synthesis of colloidal platinum nanoparticles by Preyssler polyoxometalate
In the present study, platinum nanoparticles were synthesized through an effective, facile and green method using H14[NaP5W30O110], a Preyssler-structured polyoxometalate, under UV light irradiation. Preyssler plays the roles of photocatalyst, reducing agent and stabilizer in the synthesis of Pt nanoparticles. The effect of different parameters, i.e. time, propan-2-ol volume, pH, molar ratio of...
متن کاملNanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study
With the aim of promoting the Ni/Ce0.8Gd0.2O2-δ (Ni/GDC20) cermet anodic performance of low temperature solid oxide fuel cell (LT-SOFC) [1], nanostructuring platinum nanoparticles on NiO/GDC composite was done by single-step wet-infiltration of hexachloroplatinic acid hexahydrate (H2PtCl6.6H2O) precursor on NiO/GDC20 composite. The anodic polarization resistance was measured using symmetr...
متن کاملSynthesis and characterization of the Pt/SiO2 nanocomposite by the sol-gel method
The silica supported platinum nanoparticles was synthesized by using the sol-gel method. The possibility of using diamminedinitro platinum (II) as Pt precursor and effect of metal precursor concentration on the final Pt nanoparticle size was investigated. A stable silica sol was prepared via hydrolysis of tetraethyl orthosilicate (TEOS) as a metal alcoxide and condensation reaction. Subsequentl...
متن کاملBiogenic Approach using Sheep Milk for the Synthesis of Platinum Nanoparticles: The Role of Milk Protein in Platinum Reduction and Stabilization
Bio-directed synthesis of nanoparticles is an interesting field of rapid advancement for biologists,chemists and materials scientists, especially in light of efforts to find out green methods of inorganicmaterial synthesis. In the present study, green synthesis of platinum nanoparticles (PtNPs) using sheepmilk is reported for the first time. By adjusti...
متن کاملOne-step microwave-assisted asymmetric cyclisation/hydrogenation of citronellal to menthols using supported nanoparticles on mesoporous materials.
The selective conversion of citronellal to menthols, with good diastereoselectivities to (-)-menthol for the case of (+)-citronellal as starting material, can effectively be carried out in a one-step reaction under microwave irradiation catalysed by supported nanoparticles on mesoporous materials. 2% Pt/Ga-MCM-41 was found to be the optimum catalyst for the reaction, with a quantitative convers...
متن کامل