Mechanical Characterization and Electrochemical Sensor Applications of Zinc Oxide Nanostructures

Nanotechnology is emerging to be one of the most important scientific disciplines that physics, chemistry and biology truly overlap with each other. Over the last two decades science and technology have witnessed tremendous improvement in the hope of unveiling the true secrets of the nature in molecular or atomic level. Today, the regime of nanometer is truly reached. ZnO is a promising material due to the wide direct band gap (3.37 eV) and the room temperature large exciton binding energy (60 meV). Recent studies have shown considerable attraction towards ZnO nanostructures, particularly on one-dimensional ZnO nanorods, nanowires, and nanotubes due to the fact that, for a large number of applications, shape and size of the ZnO nanostructures play a vital role for the performance of the devices. The noncentrosymmetric property of ZnO makes it an ideal piezoelectric material for nanomechanical devices. Thus, mechanical characterization of one dimensional ZnO nanostructures including strength, toughness, stiffness, hardness, and adhesion to the substrate is very important for the reliability and efficient operation of piezoelectric ZnO nanodevices. Moreover, owing to the large effective surface area with high surface-to-volume ratio, the surface of one dimensional ZnO nanowires, nanorods, and nanotubes is very sensitive to the changes in surface chemistry and hence can be utilized to fabricate highly sensitive ZnO electrochemical sensors. This thesis studies mechanical properties and electrochemical sensor applications of ZnO nanostructures. The first part of the thesis deals with mechanical characterization of vertically grown ZnO nanorods and nanotubes including buckling, mechanical instability, and bending flexibility. In paper I, we have investigated mechanical instability and buckling characterization of vertically aligned single-crystal ZnO nanorods grown on Si, SiC, and sapphire substrates by vapor-liquid-solid (VLS) method. The critical loads for the ZnO nanorods grown on Si, SiC, and sapphire were measured and the corresponding buckling and adhesion energies were calculated. It was found that the nanorods grown on SiC substrate have less residual stresses and are more stable than the nanorods grown on Si and sapphire substrates.