Thermal Analysis of a Sliding Electric Contact System Using Finite Element Method
ثبت نشده
چکیده
In this paper a three dimensional thermal model of a sliding contact system is proposed for both steady-state or transient conditions. The influence of contact force, electric current and ambient temperature on the temperature distribution, has been investigated. A thermal analysis of the different type of the graphite material of fixed electric contact and its influence on contact system temperature rise, has been performed. To validate the three dimensional thermal model, some experimental tests have been done. There is a good correlation between experimental and simulation results. Keywords—Sliding electric contact, temperature distribution, thermal analysis.
منابع مشابه
Earthquake Analysis of 3-D Structures on Sliding Foundation Using Yield Equation of the Contact Surface
A solution technique for the dynamic analysis of asymmetric base-isolated buildings, subject to earthquake ground motion, is presented. To develop the formulation, a yield surface as a function of both shear force and torsion moment of the sliding surface with rigid perfectly plastic behavior is constituted. To achieve the objective, the yield stress is defined by the friction coefficient throu...
متن کاملEarthquake Analysis of 3-D Structures on Sliding Foundation Using Yield Equation of the Contact Surface
A solution technique for the dynamic analysis of asymmetric base-isolated buildings, subject to earthquake ground motion, is presented. To develop the formulation, a yield surface as a function of both shear force and torsion moment of the sliding surface with rigid perfectly plastic behavior is constituted. To achieve the objective, the yield stress is defined by the friction coefficient throu...
متن کاملThermal analysis of functionally graded materials in cylinders and pistons based on super element method
In the present article, the thermal analysis of the cylinder and the piston in four-cylinder engines, made of functionally graded materials (FGMs), has been performed by using the super element method. The objective of using FGMs in the cylinder and the piston is to increase their performance. FGMs include a combination of ceramics and metals. Inside the cylinder, the ceramic is considered and ...
متن کاملSimulation and Experimental Study of Vibration and Noise of Pure Electric Bus Transmission based on Finite Element and Boundary Element Methods
Since the electric motor of pure electric vehicle replaced the engine, the "masking effect" disappears, and the problem of vibration and noise of the transmission becomes prominent. This is generated during the gear meshing and is transmitted to the housing through the shaft and bearing. Thereby, radiation noise of the housing are generated. The prediction and analysis...
متن کاملInvestigation the effect of driving pattern on thermal performance of Nissan Leaf’s electric motor
Whereas reducing carbon pollutant and fossil fuel energy consumption have become the most important environmental and economic concerns in the world, electric vehicles and their cooling system are in automotive industry manufacturers and designers agendum more than ever. Various motor electromagnetic and mechanical losses act as heat sources and could lead to performance falloff and premature e...
متن کامل