Fast volume scanning approaches by X-ray-computed tomography
نویسندگان
چکیده
X-ray-computed tomography (CT) successfully underwent a transition from slice-by-slice imaging to volume imaging in the decade after 1990 due to the introduction of spiral scan modes. Later, the transition from single-slice to multislice scanning followed. With the advent of new detector technologies we are now looking forward to circular and spiral scanning using area detectors and the respective reconstruction approaches. This review treats the basic technological and algorithmic prerequisites and approaches. It goes into detail with respect to the achievable performance and image quality characteristics and discusses the range of applications. Scanning of the complete body trunk with submillimeter isotropic resolution in less than 30 s is possible today. Further extensions to new medical applications, for example, cardiac CT, but also to nonmedical applications, for example, nondestructive material testing, make CT an emerging imaging modality again.
منابع مشابه
Assessment of X-Ray Crosstalk in a Computed Tomography Scanner with Small Detector Elements Using Monte Carlo Method
Introduction: Crosstalk is a leakage of X-ray or light produced in a matrix of X-ray detectors or array of photodiodes in one element to other elements affecting on image contrast and spatial resolution. In this study, we assessed X-ray crosstalk in a computed tomography (CT) scanner with small detector elements to estimate the effect of various parameters such as X-ray tube voltage, detector e...
متن کاملImpact of Photon Spectra on the Sensitivity of Polymer Gel Dosimetry by X-Ray Computed Tomography
Introduction: The purpose of the current study was to investigate the effect of X-ray spectra on the sensitivity of a polymer gel dosimeter imaged with a conventional computed tomography (CT) scanner. Material and Methods: The whole process of CT imaging of an irradiated polymer gel was simulated by MCNPX Monte Carlo (MC) code. The imaging of polyacrylamide gel was accomplished by means of a co...
متن کاملAdaptive CT scanning—mesh based optimisation methods for industrial X-ray computed tomography applications
We present new methods to optimise industrial computed tomography (CT) scanning process. The methods were applied on CT systems— with high-energy X-ray tube sources (.400 keV)—using cross-sectional images for volume digitalisation. Commonly the distances between all cross-sectional slices for volume data acquiring are constant. We developed a new adaptive CT scanning method, which optimises the...
متن کاملAccelerated Optimization Algorithms for Statistical 3d X-ray Computed Tomography Image Reconstruction
ACCELERATED OPTIMIZATION ALGORITHMS FOR STATISTICAL 3D X-RAY COMPUTED TOMOGRAPHY IMAGE RECONSTRUCTION by Donghwan Kim Chair: Jeffrey A. Fessler X-ray computed tomography (CT) has been widely celebrated for its ability to visualize the anatomical information of patients, but has been criticized for high radiation exposure. Statistical image reconstruction algorithms in X-ray CT can provide impro...
متن کاملAbsolute Permeability Calculation by Direct Numerical Simulation in Porous Media
Simulating fluid flow at micro level is an ongoing problem. Simplified macroscopic flow models like Darcy’s law is unable to estimate fluid dynamic properties of porous media. The digital sample reconstruction by high resolution X-ray computed tomography scanning and fluid-dynamics simulation, together with the increasing power of super-computers, allow to carry out pore-scale simulations throu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Proceedings of the IEEE
دوره 91 شماره
صفحات -
تاریخ انتشار 2003