The Effect of Oversampling on Aperture Jitter in Bandpass Sampling Receivers
نویسندگان
چکیده
Bandpass sampling allows for the digitisation of bandpass signals at RF or intermediate frequencies. This is desirable for reconfigurable radio systems, where, as many radio functions as possible should be defined in software to create a flexible transceiver. However, the effects of aperture jitter limit sampling at high carrier frequencies. This paper investigates the effects of jitter in bandpass sampling systems, and describes how oversampling the information signal has an impact on the effects of jitter.
منابع مشابه
Analysis of Timing Jitters on the Performance of Bandpass DT-Sigma Delta ADC for Software Defined Radio Receivers
In the present scenario, wireless technologies require an advanced receiver which supports multistandard and multi-mode transmission. In an ideal software radio, the data conversion process occurs immediately after the antenna in the receiver chain..A/D conversion at an early stage plays an important role for achieving such flexibility at the receiver. Bandpass sampling allows for the digitisat...
متن کاملThe Effect of Clock Jitter on the Performance of Bandpass Σ∆ ADCs
In this paper, we build a novel well-proved model for describing the combined error due to clock jitter and quantization noise on the performance of bandpass sigma delta (Σ∆) analog to digital converters (ADCs). The clock jitter is modeled as a timing variation of the sampling process which follows the characteristic of the Wiener process. Computer simulations as well as theoretical calculation...
متن کاملEnhancement of Noise Performance in Digital Receivers by Over Sampling the Received Signal
In wireless channel the noise has a zero mean. This channel property can be used in the enhancement of the noise performance in the digital receivers by oversampling the received signal and calculating the decision variable based on the time average of more than one sample of the received signal. The averaging process will reduce the effect of the noise in the decision variable that will approa...
متن کاملAperture Jitter Effects in Software Radio GNSS Receivers
Increasingly, software radio techniques are being used in the implementation of communications receivers in general, and GNSS receivers in particular. In such a receiver, the received signal is sampled as close to the receive antenna as possible, and all subsequent processing uses digital signal processing (DSP) techniques. The sampling clock will suffer from phase noise instabilities, leading ...
متن کاملClock Jitter Estimation and Suppression in OFDM Systems Employing Bandpass Σ∆ ADC
In this paper, we analyze the effect of clock jitter on the performance of OFDM-based systems applying digital IF architecture. A bandpass Σ∆ ADC is used for the analog to digital conversion process. An accurate and realistic model of the clock jitter in bandpass Σ∆ ADC is implemented. Results from this paper show that clock jitter severely degrades OFDM system performance by introducing both p...
متن کامل