Effects of Damping and Varying Contact Area at Blade-Disk Joints in Forced Response Analysis of Bladed Disk Assemblies
نویسندگان
چکیده
An approach is developed to analyze the multiharmonic forced response of large-scale finite element models of bladed disks taking account of the nonlinear forces acting at the contact interfaces of blade roots. Area contact interaction is modeled by area friction contact elements which allow for friction stresses under variable normal load, unilateral contacts, clearances, and interferences. Examples of application of the new approach to the analysis of root damping and forced response levels are given and numerical investigations of effects of contact conditions at root joints and excitation levels are explored for practical bladed disks. DOI: 10.1115/1.2181998
منابع مشابه
Explicit Finite Element Models of Friction Dampers in Forced Response Analysis of Bladed Disks
A generic method for analysis of nonlinear forced response for bladed disks with friction dampers of different designs has been developed. The method uses explicit finite element modeling of dampers, which allows accurate description of flexibility and, for the first time, dynamic properties of dampers of different designs in multiharmonic analysis of bladed disks. Large-scale finite element da...
متن کاملUncertainty treatment in forced response calculation of mistuned bladed disk
Mistuning, imperfections in cyclical symmetry of bladed disks is an inevitable and perilous occurrence due to many factors ncluding manufacturing tolerances and in-service wear and tear. It can cause some unpredictable phenomena such as mode splitting, ode localization and dramatic difference in forced vibration response. In this paper first, a method is presented which calculates he forced vib...
متن کاملDynamic Characteristics of Blade-Disk-Rotor System with Structural Mistuned Features
The finite element method is adopted to establish the dynamical models of blade, bladed disk and blades-diskshaft assemblies. Based on the analysis of mistuned structure and the dynamic characteristics of model in different levels, it gives the vibration mode distribution of different models. The research shows that the characteristics of the bladed disk and shaft have a huge difference, where ...
متن کاملCracking-Induced Mistuning in Bladed Disks
A study of the mechanisms of cracking-induced mistuning in bladed disks is presented in this paper. An analytical model for a bladed disk was formulated using lumped-mass-beams, and a cracked blade was represented by a beam with a through-crack at the root. Local stiffness reduction due to cracking was incorporated using a flexibility matrix method. The dynamic characteristics of the bladed dis...
متن کاملAeroelastic Modal Characteristics of Mis tuned Blade Assemblies: Mode Localization and Loss of Eigenstructure
An investigation of the effects of small mistiming on the aeroelastic modes of bladed-disk assemblies with aerodynamic coupling between blades is presented. The cornerstone of the approach is the use and development of perturbation methods that exhibit the crucial role of the interblade coupling and yield general findings regarding mistuning effects. It is shown that blade assemblies with weak ...
متن کامل