Error Analysis and Compensation Method Of 6-axis Industrial Robot
نویسندگان
چکیده
Jianhao Zhang, Jinda Cai Numerical Control And Display Lab, USST, 200093 ShangHai,China Emails:[email protected] Abstract:A method of compensation is proposed based on the error model with the robot’s parameters of kinematic structure and the joint angle. Using the robot kinematics equation depending on D-H algorithm, a kinematic error model is deduced relative to the end actuator of the robot, a comprehensive compensation method of kinematic parameters’ error by mapping structural parameters to the joint angular parameter is proposed. In order to solve the angular error problem in the compensation process of each joint, designs a set of robot’s kinematic parameter compensation experiment based on the joint angle’s correction. The experimental results verify the effectiveness of the presented method. Besides, puts forward that the main factor of the dynamic error is the deformation of the connecting rods. Software compensation way is analyzed in the paper.
منابع مشابه
Discrete time robust control of robot manipulators in the task space using adaptive fuzzy estimator
This paper presents a discrete-time robust control for electrically driven robot manipulators in the task space. A novel discrete-time model-free control law is proposed by employing an adaptive fuzzy estimator for the compensation of the uncertainty including model uncertainty, external disturbances and discretization error. Parameters of the fuzzy estimator are adapted to minimize the estimat...
متن کاملImplementation and Computer Simulation of Robot Joint Error Maximum Mutual Compensation
The method of end-effector pose accuracy improvement using joint error mutual compensation for robotic manipulators with rotation joints was presented. The computer simulation and experiments of the developed method showed that it was possible to perform the technological operations with a higher accuracy in the special areas of the robot working space using the developed approach. The method p...
متن کاملANFIS+PID Hybrid Controller Design for Controlling of a 6-DOF Robot Manipulator and its Error Convergence Analysis
In this paper, an ANFIS+PID hybrid control policy has been addressed to control a 6-degree-of freedom (6-DOF) robotic manipulator. Then its error convergence has been also evaluated. The ability to formulate and estimate the system uncertainties and disturbances along with system dynamics and rejecting the disturbances effect are some advantages of the proposed method in comparing with the co...
متن کاملDelay Compensation on Fuzzy Trajectory Tracking Control of Omni-Directional Mobile Robots
This paper presents a delay compensator fuzzy control for trajectory tracking of omni-directional mobile robots. Fuzzy logic control (FLC) of the robots is a suitable strategy for dealing with model uncertainties, nonlinearities and disturbances. On the other hand, in many robotic applications such as mobile robots, delay phenomenon is able to substantially deteriorate the behavior of system's...
متن کاملNonlinear Discrete Observer for Flexibility Compensation of Industrial Robots
This paper demonstrates the solutions of digital observer implementation for industrial applications. A nonlinear high-gain discrete observer is proposed to compensate the tracking error due to the flexibility of robot manipulators. The proposed discrete observer is obtained by using Euler approximate discretization of the continuous observer. A series of experimental validations have been carr...
متن کامل