Degradability of fluorapatite-leucite ceramics in naturally acidic agents.

نویسندگان

  • Boonlert Kukiattrakoon
  • Chanothai Hengtrakool
  • Ureporn Kedjarune-Leggat
چکیده

This study was conducted to evaluate the titratable acidity and effect of naturally acidic agents on the surface microhardness, elemental composition, and surface morphology of fluorapatite-leucite ceramics. One hundred and ten ceramic disks (IPS d.SIGN), 12.0 mm in diameter and 2.0 mm in thickness, were fabricated. Before immersion, the baseline data of Vickers microhardness and elemental composition were recorded. Four groups were immersed in acidic agents (citrate buffer solution, green mango juice, and pineapple juice) and deionized water (control) at 37ºC for 168 hours, whereas one group was immersed in 4% acetic acid at 80ºC for 168 hours. After immersion, specimens were evaluated and data were analyzed using one-way repeated ANOVA and Tukey's test (α=0.05). Microhardness values significantly decreased after immersion (p<0.05). In terms of elemental composition, the weight percentages of silicon, potassium, aluminum, and sodium also decreased after immersion (p<0.05). Results of this study showed that fluorapatite-leucite ceramics were affected by long-term immersion in acidic agents.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Vicker's microhardness and energy dispersive x-ray analysis of fluorapatite-leucite and fluorapatite ceramics cyclically immersed in acidic agents.

This study evaluated the microhardness and elemental composition of various ceramics immersed in acidic agents. One hundred and five discs of fluorapatite-leucite (IPS d.SIGN) and fluorapatite ceramics (IPS e.max Ceram) were randomly divided into 7 groups of 15 each. Five groups were alternately immersed in acidic agents (citrate buffer solution, pineapple juice, green mango juice, cola soft dr...

متن کامل

Influence of surface conditioning on ceramic microstructure and bracket adhesion.

The objective of this study was to investigate the influence of different conditioning procedures on various ceramic microstructures and bracket adhesion. Ceramic specimens (feldspathic, leucite, leucite-free, and fluorapatite) were mechanically conditioned (n = 20 per ceramic type) with conventional hydrofluoric acid (5 per cent HF; 60/30 seconds), buffered hydrofluoric acid (9.6 per cent BHF;...

متن کامل

Flexural strength of fluorapatite-leucite and fluorapatite porcelains exposed to erosive agents in cyclic immersion

OBJECTIVE The aim of this study was to evaluate the flexural strength of two porcelain materials (IPS d.SIGN and IPS e.max Ceram) exposed to erosive agents. MATERIAL AND METHODS One hundred and twenty bar-shaped specimens were made from each of fluorapatite-leucite porcelain (IPS d.SIGN) and fluorapatite porcelain (IPS e.max Ceram) and divided into 8 groups of 15 specimens each. Six groups we...

متن کامل

Properties and Clinical Application of Three Types of Dental Glass-Ceramics and Ceramics for CAD-CAM Technologies

The main properties (mechanical, thermal and chemical) and clinical application for dental restoration are demonstrated for three types of glass-ceramics and sintered polycrystalline ceramic produced by Ivoclar Vivadent AG. Two types of glass-ceramics are derived from the leucite-type and the lithium disilicate-type. The third type of dental materials represents a ZrO2 ceramic. CAD/CAM technolo...

متن کامل

Microstructure of etched "IPS Empress" heat-pressed ceramics observed by SEM.

A valuable characteristic of the "IPS Empress" used for producing all ceramic dental restorations is that it is a prefired ceramic ingot. The ingot is heated, softened and press-injected into the cavity, and ceramic restorations are fabricated by the lost wax casting method. The leucite crystal present in the ingot are scattered and distributed into the glassy phase in a more homogeneous manner...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Dental materials journal

دوره 29 5  شماره 

صفحات  -

تاریخ انتشار 2010