The Influence of Additives on the Current Carrying Capacity of Bulk
نویسندگان
چکیده
We studied the influence of using different powders and several additives on the shaping process and critical current density of sintered bulk YBa2Cu30x' It was found that all additives used facilitated the shaping process. Silver and most organic additives influenced the critical current density only little, Zinc reduced it to zero, but an ethylenebisstearoylamide compound doubled the critical current density as compared to samples without additives.
منابع مشابه
ارزیابی ظرفیت برد گردشگری منطقه حفاظت شده قیصری در استان چهارمحال و بختیاری
It is now certain that to ensure a long term sustainable development, protected areas, the favored destinations for ecotourism, required a well written planning management. Each destination however has limited capability which is called “carrying capacity” to invite visitors. Physical, real (ecological) and effective (manageable) are different kinds of carrying capacity. The current study prese...
متن کاملEvaluating total carrying capacity of tourism using impact indicators
The carrying capacity is well identified tool to manage problems due to uncontrolled tourism for any destination. This report highlights the carrying capacity estimation of Kerwa tourism area, Bhopal, India. The methodology used in this report is a new two-tier mechanism of impact analysis using index numbers derived from a survey of 123 stakeholders. From this the individual component impact a...
متن کاملHybrid Model for Bulk Current Injection Probe
A new hybrid-model for BCI probe is derived . This model is built based on the probe's internal structure without refinements, and by carrying out just one electrical measurement for the reflection coefficient, so that it can be generalized and used in studying the effect of layout parameters in the aim of improving the probe high frequency performance, which helps the developer in design stage...
متن کاملThe Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite
Alumina-Mullite-Zirconia ceramic composites were prepared by reaction sintering of alumina, zircon mixture and the sintering aids of magnesia and titania at temperatures of 1400 and 1600 C for 2 hours. The development of different phases and microstructures of the composites were analysed to assess the relative influence of the additives on the formation of alumina-zirconia-mullite compos...
متن کاملResistance spot welding of AISI 201 stainless steel: The relationship between welding current, microstructure, mechanical properties and failure mode
In this paper, resistance spot welding process of AISI 201 stainless steel is studied experimentally. For this purpose, effect of welding current on quality of weld is investigated and relationships between welding current and fusion zone characteristics are examined. For determining mechanical properties such as maximum load and fracture mode, tensile - shear test of spot welds is performed. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009