Digitisation of laser-based manufacturing in Europe
نویسنده
چکیده
The European commission, Photonics 21 and LASHARE invite to a forum at Laser World of Photonics in Munich on June 29th from 10:00 to 14:00 in Hall B3.360. Under the headline “Digitisation of laserbased manufacturing in Europe” the program intends to identify topics and activities that support digitisation in the photonics sector. After an overview about research agendas and work programmes by the Commission and Photonics 21, the two I4MS projects APPOLO and LASHARE provide an overview about their innovation scheme. A workshop from 11:20 to 12:00 will involve the audience to discuss issues that are connected to digitisation and to collect ideas for future research and innovation programmes. From 12:00 onwards, laser research and innovation projects that receive funding from the European commission will complement the overview with reports about their achievements.
منابع مشابه
Study on Microstructure and Mechanical Properties of Laser Welded Joints of 1.7225 Steel
The aim of the present study is to investigate the mechanical and microstructural properties of 1.7225 steel in laser welding process using Nd:YAG pulsed laser device and then to determine the optimal focal length relative to the part in the welding area. After welding, microstructural characterization, microhardness and tensile tests were performed. Evaluations showed that the optimal focal le...
متن کاملStudy on Microstructure and Mechanical Properties of Laser Welded Joints of 1.7225 Steel
The aim of the present study is to investigate the mechanical and microstructural properties of 1.7225 steel in laser welding process using Nd:YAG pulsed laser device and then to determine the optimal focal length relative to the part in the welding area. After welding, microstructural characterization, microhardness and tensile tests were performed. Evaluations showed that the optimal focal le...
متن کاملInvestigating the microstructure and hardness of 17-4PH steel and Stellite cladded by direct laser deposition process on 17-4PH steel substrate
The purpose of this research is to laser cladding of stellite6 and stainless steel 17-4PH powders on the substrate of stainless steel 17-4PH, and investigate its solidification microstructure. The results showed that the microstructure of the stellite6 cladding has a cobalt solid solution ground phase with an FCC structure and Cr7C3 and Cr23C6 carbides. Also, the values of the primary dendrit...
متن کامل3D Digitisation of Large-Scale Unstructured Great Wall Heritage Sites by a Small Unmanned Helicopter
The ancient Great Wall of China has long suffered from damage due to natural factors and human activities. A small low-cost unmanned helicopter system with a laser scanner and a digital camera is developed to efficiently visualize the status of the huge Great Wall area. The goal of the system is to achieve 3D digitisation of the large-scale Great Wall using a combination of fly-hover-scan and f...
متن کاملInvestigating the microstructure and hardness of 17-4PH steel and Stellite cladded by direct laser deposition process on 17-4PH steel substrate
The purpose of this research is to laser cladding of stellite6 and stainless steel 17-4PH powders on the substrate of stainless steel 17-4PH, and investigate its solidification microstructure. The results showed that the microstructure of the stellite6 cladding has a cobalt solid solution ground phase with an FCC structure and Cr7C3 and Cr23C6 carbides. Also, the values of the primary dendrit...
متن کامل