Entropy generation rate during laser pulse heating: Effect of laser pulse parameters on entropy generation rate
نویسندگان
چکیده
Laser pulse heating of solid surface and entropy generation during the heating process are considered. Time exponentially decaying pulse is accommodated in the analysis and the laser pulse parameter (b1/b2) resulting in minimum entropy generation rate is computed. Analytical solutions for temperature rise are presented and volumetric entropy generation rate is formulated. Two laser pulses resulting in low volumetric entropy generation rate are examined in detail and volumetric entropy generation rate is associated with the laser pulse parameter (b1/b2). It is found that volumetric entropy generation rate attains high values in the early heating period due to large (1/T ). Moreover, the laser pulse with high-peak intensity results in lower volumetric entropy generation rate than that corresponding to the low-intensity laser pulse with the same energy content. r 2007 Elsevier Ltd. All rights reserved.
منابع مشابه
Investigation of the Slipping Wear based on the Rate of Entropy Generation
Wear is a complicated phenomenon caused by the relative movement of two contacting surfaces compressed together by a normal force. Prediction of the wear, in most cases, requires various experiments and microstructural characterization of the contacting surfaces. Mathematical models based on physical concepts could provide considerable help in understanding the physical behavior and hence the p...
متن کاملEntropy Generation In an Unsteady MHD Channel Flow With Navier Slip and Asymmetric Convective Cooling
The combined effects of magnetic field, Navier slip and convective heating on the entropy generation in a flow of a viscous incompressible electrically conducting fluid between two infinite horizontal parallel plates under a constant pressure gradient have been examined. Both the lower and upper plates of the channel are subjected to asymmetric convective heat exchange with the ambient fluid. T...
متن کاملInvestigation of the Slipping Wear based on the Rate of Entropy Generation
Wear is a complicated phenomenon caused by the relative movement of two contacting surfaces compressed together by a normal force. Prediction of the wear, in most cases, requires various experiments and microstructural characterization of the contacting surfaces. Mathematical models based on physical concepts could provide considerable help in understanding the physical behavior and hence the p...
متن کاملTime Frequency Analysis of Higher Harmonic Generation in a Three Color Laser Pulse
high harmonic generation is a useful tool for the generation of short, intense attosecond pulses. In order to simulate high harmonic generation, we performed a numerical solution to the time dependent Schrödinger equation. by considering dipole approximation, we predicted generation of a 53 attosecond pulse. In order to see the time and frequency of emission of attosecond pulse, we exploit...
متن کاملTransient Entropy Generation Analysis During Wustite Pellet Reduction to Sponge Iron
The present study carefully examined entropy generation during wustite pellet reduction to sponge iron. The finite volume method was used to solve the governing equations. The grain model was used to simulate the reaction rate. The reactant gases including carbon monoxide and hydrogen were converted to water and carbon dioxide after wustite reduction. Entropy is generated by heat transfer, mass...
متن کامل