Vesicle extrusion through polycarbonate track-etched membranes using a hand-held mini-extruder.
نویسندگان
چکیده
The vesicle extrusion method is used for preparing small (e.g., 100 nm diameter) monodisperse (uniform-sized) vesicles. Polycarbonate track-etched membranes with pores generally ranging from 50 to 200 nm in diameter and a hand-held mini-extruder are used for such a procedure. Extrusion through small (100 nm in diameter or smaller) pores also ensures that the vesicle population is predominantly unilamellar.
منابع مشابه
The pressure-dependence of the size of extruded vesicles.
Variations in the size of vesicles formed by extrusion through small pores are discussed in terms of a simple model. Our model predicts that the radius should decrease as the square root of the applied pressure, consistent with data for vesicles extruded under various conditions. The model also predicts dependencies on the pore size used and on the lysis tension of the vesicles being extruded t...
متن کاملEvaluation of Vapor Deposition Techniques for Membrane Pore Size Modification
The suitability of three vapor deposition techniques for pore size modification was evaluated using polycarbonate track etched membranes as model supports. A feature scale model was employed to predict the pore geometry after modification and the resulting pure water flux. Physical vapor deposition (PVD) and pulsed plasma-enhanced chemical vapor deposition (PECVD), naturally, form asymmetric na...
متن کاملLow-voltage electroosmotic pumps fabricated from track-etched polymer membranes.
Track-etched polymer membranes are used to realize low-voltage electroosmotic (EO) pumps. The nanopores in polycarbonate (PC) and polyethylene terephthalate (PET) membranes were fabricated by the track-etching technique, the pore diameter was controlled in the range of 100 to 250 nm by adjusting the etching time. The results show that these EO pumps can provide high flow rates at low applied vo...
متن کاملConformal SiO2 coating of sub-100 nm diameter channels of polycarbonate etched ion-track channels by atomic layer deposition
Polycarbonate etched ion-track membranes with about 30 µm long and 50 nm wide cylindrical channels were conformally coated with SiO2 by atomic layer deposition (ALD). The process was performed at 50 °C to avoid thermal damage to the polymer membrane. Analysis of the coated membranes by small angle X-ray scattering (SAXS) reveals a homogeneous, conformal layer of SiO2 in the channels at a deposi...
متن کاملEffect of Pore Morphology on Fluid Flow through Track-Etched Polycarbonate Membrane
The effect of pore morphology on fluid flow through track-etched polycarbonate membrane was studied numerically by using the fluid flow software FLUENT. The model of membrane structure is a 3D bi-periodic porous surface with circular holes of finite thickness. Both of the effects of constriction and expansion of inner pore geometries on fluid flow are taken into consideration in numerical calcu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Methods in enzymology
دوره 533 شماره
صفحات -
تاریخ انتشار 2013