Effect of Torrefaction on the Properties of Corn Stalk to Enhance Solid Fuel Qualities
نویسنده
چکیده
This study presents the effects of torrefaction on the basic characteristics of corn stalks. Corn stalks were torrefied in a horizontal tubular reactor at temperatures ranging from 150 °C to 400 °C, for torrefaction periods varying from 0 min to 50 min. The torrefied corn stalk products were characterized in terms of their elemental composition, energy yield, ash content, and volatile fraction. The gaseous products were also analyzed. Thermogravimetric analysis (TGA) of the samples was carried out in order to obtain the apparent activation energy for the torrefaction of corn stalks. The weight loss data according to the degradation temperature were analyzed using three different methods. The energy and mass yield were found to decrease with an increase in the temperature, whereas the higher heating value (HHV) increased. From this work, it was found that the compounds with oxygen were emitted at a temperature lower than that for hydrocarbon gases and the temperatures of 290–330 °C were the optimum torrefaction temperatures for corn stalks.
منابع مشابه
Dissolving Pulp (alpha-cellulose) from Corn Stalk by Kraft Process
Corn stalk can be used as an alternative non-wood raw material to produce cellulosic dissolving grade pulp. In this work, the potential of corn stalk in the production of dissolving pulp (alpha-cellulose) was investigated. It was collect ed from a corn stalk farm of Kermanshah, Iran. The sequences of experimental work were: water and acid prehydrolysis at 160˚C for 30min, followed by Kraft pulp...
متن کاملThe Effects of Particle Size, Different Corn Stover Components, and Gas Residence Time on Torrefaction of Corn Stover
Large scale biofuel production will be possible only if significant quantities of biomass feedstock can be stored, transported, and processed in an economic and sustainable manner. Torrefaction has the potential to significantly reduce the cost of transportation, storage, and downstream processing through the improvement of physical and chemical characteristics of biomass. The main objective of...
متن کاملImpact of torrefaction on the grindability and fuel characteristics of forest biomass.
Thermal pretreatment or torrefaction of biomass under anoxic condition can produce an energy dense and consistent quality solid biomass fuel for combustion and co-firing applications. This paper investigates the fuel characteristics and grindability of pine chips and logging residues torrefied at temperatures ranging from 225 °C to 300 °C and 30 min residence time. Grinding performance of torre...
متن کاملInvestigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application
In present research work, homogeneous anion exchange membranes based on polysulfone (QAPSFs) were prepared via chloromethylation, amination and alkalization. In amination step, trimethylamine and N,N,N',N'-tetramethyl-1,6-hexanediamine were used as amination and crosslinking agents, respectively. The chloromethylated polysulfone was characterized by 1HNMR spectroscopy and chloromethylation degr...
متن کاملManufacturing Technology and Parameter Optimization for Composite Board from Corn Stalk Rinds
To improve the bonding strength between adhesive and enhance the performance of composite board made from corn stalk rinds, a method for preparing three-layer composite boards was proposed. Accordingly, corn stalk rinds with the epidermis removed, were used as the core layer, while crushed aggregates from the epidermis were used as the surface layer of the composite board. Single-factor and ort...
متن کامل