Optimization of electrochemical polishing of stainless steel by grey relational analysis
نویسندگان
چکیده
Grey relational analysis is useful for the multi-input, discrete data and uncertain experimental study. Developed in this paper is the application of the grey relational analysis for optimizing the electropolishing of 316L stainless steel with multiple performance characteristics. The processing parameters (temperature, current density, and electrolyte composition) are optimized with considerations of the multiple performance characteristics (surface roughness and passivation strength). The conducted experiments approve the effectiveness of the grey relational analysis. © 2003 Elsevier B.V. All rights reserved.
منابع مشابه
Optimization of gas metal arcwelding parameters of SS304 austenitic steel by Taguchi –Grey relational analysis
This study investigated the optimization of three welding parameters (wire feed speed, arc voltage, and shielding gas flow rate) for SS 304H by using Taguchi based Grey relational analysis. In this research work, pure argon was used as shielding gas. Numbers of trials were performed as per L16 (4xx3) orthogonal array design and the mechanical quality such ultimate tensile strength, microhardnes...
متن کاملMulti-objective optimization in WEDM of D3 tool steel using integrated approach of Taguchi method & Grey relational analysis
In this paper, wire electrical discharge machining of D3 tool steel is studied. Influence of pulse-on time, pulse-off time, peak current and wire speed are investigated for MRR, dimensional deviation, gap current and machining time, during intricate machining of D3 tool steel. Taguchi method is used for single characteristics optimization and to optimize all four process parameters simultaneous...
متن کاملOptimizing turning operation of St37 steel using grey relational analysis
Nowadays, in order to reach minimum production cost in machining operations, various optimization methods have been proposed. Since turning operation has different parameters affecting the workpiece quality, it was selected as a complicated manufacturing method in this paper. To reach sufficient quality, all influencing parameters such as cutting speed, federate, depth of cut and tool rake angl...
متن کاملElectrochemical Polishing of Patterned Copper Films
For decades Electrochemical Polishing (ECP) has been used for surface polishing of bulk metal materials such as copper and stainless steel. However, it was found very challenging to planarize patterned copper films electrodeposited on silicon wafers. This work studied the mechanisms of ECP, the surface profiles and ECP effects of copper bulk and films in various electrolyte solutions. Satisfied...
متن کاملElectrochemical polishing of 316L stainless steel slotted tube coronary stents.
Surface smoothness is one of the properties determining the performance of stents. Therefore, surface polishing shows its importance in the exploitation and production of stents. The present study explores electrochemical polishing of 316L stainless steel slotted tube coronary stents produced by laser cutting. Acid pickling was also studied as a pre-treatment of electrochemical polishing of the...
متن کامل