Fluorine ion implantation optimization in Saddle-Fin array devices for sub-40-nm DRAM technology
نویسندگان
چکیده
Fluorine (F) implantation with different dose post gate oxidation is used for investigating the performance of saddle-fin (S-Fin) array devices including gate-induced drain leakage (GIDL) and retention fail bit counts. Significantly lower retention fail counts of 35% were achieved in using a medium dosage of F implantation. Additional 18% retention fail count reduction was represented by F implantation with A degree tilt angle and 2X keV of energy. Trap passivation by F atoms in the source and the drain areas (S/D) could lead to the improvements.
منابع مشابه
Optical and Electrical Properties of Nitrogen Ion Implanted Fluorine Doped Tin Oxide Films
Tin oxide films were implanted with N at various energies between 5 to 40 keV for different ion doses between 10 to 10 cm. The microstructure, optical and electrical properties of the films were investigated. From Transmission Electron Microscopy the implanted films were shown to be amorphous. The implanted thickness for the 10 keV and 40 keV were found to be 30 nm and 110 nm, respectively. The...
متن کاملTantalum/ Nitrogen and n-type WO3 semiconductor/FTO structures as a cathode for the future of nano devices
In the last decades an important number of research papers published on nano chip electrode and cathode electrochromic materials. Tantalum (Ta) with so high melting point can be as a good candidate for the future of nano chip devices. However, its surface has not enough trap centers and/or occupation states, so nitrogen ions exposed on Ta surafce, may solve this problem. For this purpose, in th...
متن کاملInfluence of Ni Deposition and Subsequent N+ Ion Implantation at Different Implantation Energies on Nano-Structure and Corrosion Behavior of 316 Stainless Steels
Nickel films of 300 nm thickness were deposited by electron beam evaporation at room temperature on 316 stainless steels. Corrosion studies of Ni coated 316 SS have been performed after N+ ion implantation at different energies of 20, 40, 60 and 80 keV. The structure and surface morphology of the films were evaluated using X-ray diffraction (XRD), atomic force microscope (AFM) an...
متن کاملInfluence of nitrogen ion implantation on the nanostructure and corrosivity of Ni/stainless steel substrates
Ion implantation is a surface modification technology to produce new material on the surface by impingement of high energy ions from the ion accelerator. In this work, AISI 304 stainless steels were coated with 90 nm Ni film by electron beam deposition and implanted by a flow of 5×1017 N cm−2 at 400 K temperature with different implantation energies of 10, 20, 30 and 40 keV. The prepared sample...
متن کاملAntibacterial effect of acrylic dental devices after surface modification by fluorine and silver dual-ion implantation.
The purpose of the present study was to examine the effectiveness of fluorine and silver ions implanted and deposited into acrylic resin (poly(methyl methacrylate)) using a hybrid process of plasma-based ion implantation and deposition. The surface characteristics were evaluated by X-ray photoelectron spectroscopy (XPS), contact angle measurements, and atomic force microscopy. In addition, an a...
متن کامل