The Infineon Silicon MEMS Microphone
نویسندگان
چکیده
This paper reports on the state of the art silicon micromachined microphone utilizing a dual poly silicon membrane system. MEMS chips from 1.4mm down to 1.0mm side length are applied for mobile communication. Design aspects related with key performance parameters such as sensitivity, signal to noise ration and distortion are discussed. Sensitivity of -38BV/Pa is achieved for different microphone membrane diameters. A maximum signal to noise ration of 66dB(A) for the largest system could be achieved. The perfect fit of simulation versus measurements enables deeper analysis and balancing of noise contributors. Environmental noise suppression of 5dB by acoustical high pass design is demonstrated.
منابع مشابه
Fabrication and Characterization of a New MEMS Capacitive Microphone using Perforated Diaphragm
In this paper, a novel single-chip MEMS capacitive microphone is presented. The novelties of this method relies on the moveable aluminum (Al) diaphragm positioned over the backplate electrode, where the diaphragm includes a plurality of holes to allow the air in the gap between the electrode and diaphragm to escape and thus reduce acoustical damping in the microphone. Spin-on-glass (SOG) was us...
متن کاملThe Effect of Corrugations on Mechanical Sensitivity of Diaphragm for MEMS Capacitive Microphone
In this paper the effect of corrugated diaphragm on performance of MEMS microphone is described. The corrugated diaphragm is modeled in order to improve the sensitivity of micromachined silicon acoustic sensor. Analytical analyzes have been carried out to derive mathematic expressions for the mechanical sensitivity and displacement of corrugated diaphragm with residual stress. It is shown that ...
متن کاملAccurate Determination of the Pull-in Voltage for MEMS Capacitive Microphone with Clamped Square Diaphragm
Accurate determination of the pull-in, or the collapse voltage is critical in the design process. In this paper an analytical method is presented that provides a more accurate determination of the pull-in voltage for MEMS capacitive devices with clamped square diaphragm. The method incorporates both the linearized modle of the electrostatic force and the nonlinear deflection model of a clamped ...
متن کاملA MEMS Capacitive Microphone Modelling for Integrated Circuits
In this paper, a model for MEMS capacitive microphone is presented for integrated circuits. The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...
متن کاملFabrication of a Novel MEMS Capacitive Microphone using Lateral Slotted Diaphragm
external amplifier was able to detect the sound waves from microphone on speaker and oscilloscope. The maximum amplitude of output speech signal of amplifier is 45 mV, and the maximum output of MEMS microphone is 1.125 µV.
متن کامل