Design of the Contact Metallizations for Gold-Tin Eutectic Solder-A Thermodynamic-Kinetic Analysis
نویسندگان
چکیده
Aalto University, P.O. Box 11000, FI-00076 Aalto www.aalto.fi
منابع مشابه
Gold Embrittlement of Solder Joints
Gold embrittlement of solder joints has been written about for at least four decades [1 – 3]. Nevertheless, gold embrittlement related solder joint failures have been analyzed in this laboratory as recently as July 2009. Gold embrittlement can be avoided by careful solder joint design and knowledge of the causes of this condition. The purpose of this paper is to provide a detailed account of ma...
متن کاملInvestigation of microstructure and physical properties in nanocomposite solder reinforced with various percent of graphene nanosheets (SAC0307+GNSs)
Development of electronic industries, compression of electronic equipment, and removing lead from electronic circuits for environmental issues, resulted in a significant challenge in design and development of tin-based lead-free solders with physical and mechanical properties similar to old tin-lead alloys. In this regard, the set of Sn-Ag-Cu alloys with eutectic and near eutectic compositions ...
متن کاملInvestigation of microstructure and physical properties in nanocomposite solder reinforced with various percent of graphene nanosheets (SAC0307+GNSs)
Development of electronic industries, compression of electronic equipment, and removing lead from electronic circuits for environmental issues, resulted in a significant challenge in design and development of tin-based lead-free solders with physical and mechanical properties similar to old tin-lead alloys. In this regard, the set of Sn-Ag-Cu alloys with eutectic and near eutectic compositions ...
متن کاملElectroless Nickel / Electroless Palladium / Immersion Gold Process For Multi-Purpose Assembly Technology
As the second part to a paper presented at the 2004 SMTA Pan Pacific Symposium, this paper further summarizes the results from technical qualification of the Ni/Pd/Au process. Whereas the previous paper examined the wire bonding capabilities of this surface finish, this second paper focuses specific attention to BGA applications. In these investigations, the solder joint integrity is measured u...
متن کاملEffects of a Third Element on Microstructure and Mechanical Properties of Eutectic Sn–Bi Solder
The effects of a third element, namely silver, copper, zinc, or antimony, on the microstructure and mechanical properties of eutectic tin-bismuth (Sn–Bi) solder were investigated. The investigation showed that, except for zinc, the addition of a trace amount of the third element improves the ductility of the Sn–Bi solder owing to the formation of a fine, homogeneous ternary eutectic microstruct...
متن کامل