Two Illustrative Examples to Show the Potential of Thermography for Process Monitoring and Control in Hot Rolling
نویسندگان
چکیده
This paper deals with the systematic analysis of thermographic images recorded during the hot rolling process of steel plates. In the first part, local disturbances are detected and different approaches for disturbance rejection are proposed. From the processed images, reliable mean temperature profiles in longitudinal and lateral direction are calculated. In the second part of the paper, an optimization problem is formulated and solved to calculate the plate velocity from the thermographic images. The approach proves to be a robust estimation method for the plate velocity. As the thermographic camera is already installed for temperature measurements, no additional measurement devices are needed so that investment and maintenance costs are saved.
منابع مشابه
Investigations into the Effect of Tension Between the Stands of the Finishing Mill on Width Control in a Hot Rolling Process
This paper is concerned with investigations into the effect of tension between the stands of the finishing mill on width control in a hot rolling process. An analysis is given to predict satisfactorily the variation in width due to spreading and also due to strip tension between the stands. Wusatowskis model which is developed to give an account of spreading is specified and a similar model to ...
متن کاملInvestigation of Friction Coefficient Effects on Fishtail Defect in Hot Ring Rolling Process
Hot ring rolling is a highly nonlinear, unsteady-state and asymmetry process which is affected by many parameters. The friction coefficient between the ring ,the driver roll and the idle roll is one of the problems, which has significant effect on the quality of final product. In this study, the effect of these two parameters on hot ring rolling was investigated based on a 3D coupled-thermo mec...
متن کاملInvestigations into the Effect of Tension Between the Stands of the Finishing Mill on Width Control in a Hot Rolling Process
This paper is concerned with investigations into the effect of tension between the stands of the finishing mill on width control in a hot rolling process. An analysis is given to predict satisfactorily the variation in width due to spreading and also due to strip tension between the stands. Wusatowski's model which is developed to give an account of spreading is specified and a similar model to...
متن کاملDevelopment of a Predictive Finite Element Model For Investigation of Phases Behavior After Cold Rolling Process
One of the surface defects that arise in sheet metal working is when the part removes from the die. Since there are no external forces to make this defect, the origin of such fail is known as residual stress. Residual stress can develop in sheet metal forming due to non uniform deformation. In this paper, the workpiece is carbon steel with different volume fractions and arrangement of ferrite ...
متن کاملSignificance of Heat Conduction Parameter along the Rolling Direction in the Thermal Modeling of the Hot Rolling Process
Obtaining temperature distribution data of slabs under rolling is essential as the mechanical and metallurgical properties of the metal under this process vary with temperature. Using the control volume method, a mathematical model is employed in this study to predict slab temperature in the hot roll process at Mobarakeh Steel Company. The effects of different parameters including the heat resu...
متن کامل