Experimental data on the reflection and transmission spectral response of photocathodes
نویسندگان
چکیده
The spectral transmission and electron emissivity responses, measured for a series of typical photocathodes, are presented and analysed. Specifically, samples of S1, S20, S25, Bialkali and two types of solar-blind telluride photocathodes were investigated in both transmission and reflection modes of operation. The transmission mode is more convenient for imaging, night vision and for scintillation counting applications such as CT scanners and is more commonly used than the reflection mode. However, more recent work has focussed on the reflection photocathode as a source of electrons with low energy spread used for electron guns for microscopy and lithographic free electron lasers [1]. Our analysis provides a determination of the reflectivity of the substrate/cathode and cathode/vacuum interface, enabling the refractive index to be deduced. The high apparent quantum efficiency (QE) of some conventional photocathodes is shown to be due to the conversion of each photon to two or more electrons.
منابع مشابه
Response of GN Type II and Type III Theories on Reflection and Transmission Coefficients at the Boundary Surface of Micropolar Thermoelastic Media with Two Temperatures
In the present article, the reflection and transmission of plane waves at the boundary of thermally conducting micropolar elastic media with two temperatures is studied. The theory of thermoelasticity with and without energy dissipation is used to investigate the problem. The expressions for amplitudes ratios of reflected and transmitted waves at different angles of incident wave are obtained. ...
متن کاملFerrite material Characterization Using S-Parameters Data
ince many applications rely on the knowledge of the electromagnetic material properties of ferrites, such as ferrite phase shifters, this paper presents an algorithm for characterizing ferrite materials in a single frequency using a rectangular waveguide system. In this method, the extraction of ferrite parameters is implemented through minimizing the difference between the measured data and th...
متن کاملشبیهسازی عددی پوشش های ضد اکو حفره دار با استفاده از ترکیب روشهای اجزاء محدود و کانال آکوستیکی
The absorption performance of anechoic coatings depends on the material properties, layer thicknesses and cavity distribution density and cavity size. In this paper a design method based on numerical simulation was presented by combining FEM and acoustic duct method (ADM). Analyzing of anechoic coatings was performed under active sonar impinging plane wave by normal incident angle. In thi...
متن کاملExperimental Study of the Performance of Floating Breakwaters with Heave Motion
Nowadays, the application of floating breakwaters in small or recreational harbors has found more popularity. These types of breakwaters are more flexible in terms of design, configuration and especially installation compared with fixed breakwaters. In the current study, the performance of floating breakwater (FBs) under regular waves was studied using the physical modeling method. For the mode...
متن کاملImpact of Initial Stress on Reflection and Transmission of SV-Wave between Two Orthotropic Thermoelastic Half-Spaces
Reflection and transmission of plane waves between two initially stressed thermoelastic half-spaces with orthotropic type of anisotropy is studied. Incidence of a SV-type wave from the lower half-space is considered and the amplitude ratios of the reflected and transmitted SV-wave, P-wave and thermal wave are obtained by using appropriate boundary conditions. Numerical computation for a particu...
متن کامل