On-Line Trained Adaptive Neuro-Fuzzy Inference System for Distance Relay of Transmission line Protection

نویسندگان

  • Tamer S. Kamel
  • M. A. Moustafa Hassan
چکیده

This paper presents a new distance relay technique for transmission line protection by using well known control technique; Adaptive Neuro-Fuzzy Inference System (ANFIS). The ANFIS can be viewed either as a fuzzy system, a neural network or fuzzy neural network FNN. The structure is seen as a neural network for training and a fuzzy viewpoint is utilized to gain insight into the system and to simplify the model. The integration with neural network technology enhances fuzzy logic systems on learning capabilities. The integration with neural network technology enhances fuzzy logic systems on learning capabilities. It also provides a natural framework for combining both numerical information in the form of input/output pairs and linguistic information in the form of IF–THEN rules in a uniform fashion. The proposed technique is accomplished by one ANFIS that achieves accurate and fast estimation of distance to fault from the relay point. The normalized positive sequence impedance of the three phases are considered as inputs to the network The input data of the ANFIS were firstly derived from the fundamental values of the voltage and current measurements after making Fourier transform. Computer simulation results are shown in this paper and they indicate this approach can be used as an effective tool for location of faults for different fault conditions in fault inception time, fault impedance, fault distance and fault types

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Voting Algorithm Based on Adaptive Neuro Fuzzy Inference System for Fault Tolerant Systems

some applications are critical and must designed Fault Tolerant System. Usually Voting Algorithm is one of the principle elements of a Fault Tolerant System. Two kinds of voting algorithm are used in most applications, they are majority voting algorithm and weighted average algorithm these algorithms have some problems. Majority confronts with the problem of threshold limits and voter of weight...

متن کامل

Voting Algorithm Based on Adaptive Neuro Fuzzy Inference System for Fault Tolerant Systems

some applications are critical and must designed Fault Tolerant System. Usually Voting Algorithm is one of the principle elements of a Fault Tolerant System. Two kinds of voting algorithm are used in most applications, they are majority voting algorithm and weighted average algorithm these algorithms have some problems. Majority confronts with the problem of threshold limits and voter of weight...

متن کامل

Loss of Excitation Faults Detection in Hydro- Generators Using an Adaptive Neuro Fuzzy Inference System

This paper presents a new approach for Loss of Excitation (LOE) faults detection in Hydrogenerators using Adaptive Neuro Fuzzy Inference System. The proposed scheme was trained by data from simulation of a 345kV system under various faults conditions and tested for different loading conditions. Details of the design process and the results of performance using the proposed technique are discuss...

متن کامل

A New Structure for Direct Measurement of Temperature Based on Negative Temperature Coefficient Thermistor and Adaptive Neuro-fuzzy Inference System

Thermistors are very commonly used for narrow temperature-range high-resolution applications, such as in medicine, calorimetry, and near ambient temperature measurements. In particular, Negative Temperature Coefficient (NTC) thermistor is very inexpensive and highly sensitive, whose sensing temperature range and sensitivity are highly limited due to the intrinsic nonlinearity and self-heating p...

متن کامل

Prediction of Weld Strength in Resistance Spot Welded Samples by Adaptive Neuro-Fuzzy Inference System (ANFIS)

Resistance Spot Welding (RSW) is one of the effective manufacturing processes used widely for joining sheet metals. Prediction of weld strength of welded samples has great importance in manufacturing and different methods are used by researchers to find the fracture force. In this article, the Adaptive Neuro-Fuzzy Inference System (ANFIS) is utilized for prediction of joint strength in welded s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009