Plasma deposition of semiconductor multilayer structures
نویسندگان
چکیده
The early stages of thin film growth from the rf glow discharge of silane-based gas mixtures have been systematically studied by structural characterizations of the silicon based multilayers. The x-ray diffraction, its rocking curve and x-ray interference of hydrogenated amorphous silicon(a-Si:H, 10 % 200 A thick)/stoichiometric silicon nitride (a-SigNq:H, 25 % 250 A) multiple layers have been carefully measured. The results indicated that the amorphous silicon/silicon nitride interface is atomically abrupt and the thicknesses of the respective layers are atomically flat regardless of substrate materials. This demonstrates that the precursors impinging onto a substrate from the gas phase homogeneously cover the growing surface and layer by layer growth proceeds on atomic scale. In the plasma deposition of the covalently bonded semiconductors and insulators studied in the present experiments, the island formation on a substrate at the beginning of thin film growth is very unlikely. The extremely flat features of the ultra thin multilayer structures are also confirmed by observing the quantum size effects in the amorphous silicon/silicon nitride system.
منابع مشابه
A Review on Titanium Nitride and Titanium Carbide Single and Multilayer Coatings Deposited by Plasma Assisted Chemical Vapor Deposition
In this paper, we reviewed researches about the titanium nitride (TiN) and titanium carbide (TiC) single and multilayer coatings. These coatings were deposited by the plasma assisted chemical vapor deposition (PACVD) technique. Plasma-based technologies are used for the processing of thin films and coatings for different applications such as automobile and aerospace parts, computer disc drives,...
متن کاملIntroduction to (plasma-enhanced) atomic layer deposition
Film growth by the atomic layer deposition (ALD) method relies on alternate pulsing of the precursor gases and vapors into a vacuum chamber and their subsequent chemisorption on the substrate surface (Fig. 1) [1,2]. The different steps in the process are saturative such that ALD film growth is self-limiting yielding one submonolayer of film per deposition cycle. ALD has some unique characterist...
متن کاملInnovative process development for a new micro-tribosensor using surface micromachining
We present a study on thick Si-rich nitride/polycrystalline Si/silicon oxide multilayer-stacks made by LPCVD and PECVD techniques. The pattern transfer into the multilayer-stacks is achieved by dry etching techniques such as SF6-based ICP plasma and the so-called Bosch processes. The steep profiles and high selectivity obtained for the developed processes allow us to design and fabricate comple...
متن کاملDeposition of Al/Cu Multilayer By Double Targets Cylindrical DC Magnetron Sputtering System
A cylindrical direct current magnetron sputtering coater with two targets for deposition of multilayer thin films and cermet solar selective surfaces has been constructed. The substrate holder was able to rotate around the target for obtaining the uniform layer and separated multilayer phases. The Al/ Cu multilayer film was deposited on the glass substrate at the following conditions: Working g...
متن کاملElectrical Conductivity of Collapsed Multilayer Graphene Tubes
Synthesis of multilayer graphene on copper wires by a chemical vapor deposition method is reported. After copper etching, the multilayer tube collapses forming stripes of graphitic films, their electrical conductance as a function of temperature indicate a semiconductor-like behavior. Using the multilayer graphene stripes, a cross junction is built and owing to its electrical behavior we propos...
متن کامل