Reflectance-based calibration of SeaWiFS. II. Conversion to radiance.

For instruments that carry onboard solar diffusers to orbit, such as the Sea-Viewing Wide Field-of-View Sensor (SeaWiFS), it is possible to convert the instrument's reflectance measurements to radiance measurements by knowledge of the solar irradiance. This process, which generally requires the application of a solar irradiance model, is described. The application of the irradiance model is separate from the measurements by the instrument and from the instrument's reflectance calibration. In addition, SeaWiFS was calibrated twice before launch for radiance response by use of radiance sources with calibrations traceable to the National Institute of Standards and Technology. With the inclusion of the at-launch diffuser-based radiance calibration, SeaWiFS has three possible radiance calibrations forthe start of on-orbit operations. The combination of these three into a single calibration requires changes of 4% or less for the current at-launch radiance calibration of the instrument. Finally, this process requires changes of 4% or less for the reflectance calibration coefficients to provide consistency among the radiance calibration, the reflectance calibration, and the solar irradiance.