Studies on thermal degradation of aromatic polyesters by pyrolysis-gas chromatography.
نویسندگان
چکیده
Thermal degradation of aromatic polyesters (see text for formula) (m = 2, 3, 4, 5, and 6) was studied by pyrolysis/gas chromatography using a Curie-point pyrolyzer directly attached to a gas chromatograph with a thermally stable polar separation column (Thermon-1000) to cover a wide range of the degradation products. The characteristic peaks appearing on the pyrograms were identified using a mass spectrometer with a chemical ionization source which was also directly attached to the gas chromatograph. On the basis of the observed pyrograms, the common degradation mechanisms of the aromatic polyesters were discussed.
منابع مشابه
Synthesis and Characterization of Bio-Based Polyesters: Poly(2-methyl-1,3-propylene-2,5-furanoate), Poly(isosorbide-2,5-furanoate), Poly(1,4-cyclohexanedimethylene-2,5-furanoate)
In the present study, three new biobased furanoate polyesters with potential use in food packaging applications, named poly(isosorbide furanoate) (PIsF), poly(methyl-propylene furanoate) (PMePF) and poly(1,4-cyclohexane-dimethylene 2,5-furanoate) (PCHDMF) were synthesized. As monomers for the preparation of the polyesters, 2,5-furandicarboxylic acid (FDCA) and diols with irregular or complicate...
متن کاملAn Alternative Method for Synthesis of Thermally Stable Aromatic Polyesters Containing Schiff Base Unites
In this paper, an efficient method for synthesis of aromatic polyesters containing schiff base units is described by preparation of two polyesters. These polyesters have been prepared by the reaction of terephthaloyl dichloride on Schiff bases derived from p-hydroxybenzyldehyde and 4,4-diamino diphenyl ether, 4,4-diamino diphenyl methane. The Polymers were characterized by IR, CHNS, thermal...
متن کاملPyrolysis of foundry sand resins: a determination of organic products by mass spectrometry.
Pyrolysis-gas chromatography-mass spectrometry (MS) was used to identify the major organic products produced by pyrolysis of three foundry sand resins: (i) Novolac and (ii) phenolic urethane (PU) (both phenol-formaldehyde based resins) and (iii) furan (furfuryl alcohol based resin). These resins are used in the metal casting industry as a "sand binder" for making cores (used to produce cavities...
متن کاملAnalysis of Structural Units and Their Influence on Thermal Degradation of Alkali Lignins
The chemical structures of four alkali lignins isolated from poplar, fir, straw, and bagasse were investigated. To explore the relationship between the structural units and the thermal decomposition behavior, the system was tested by elemental analysis, Fourier transform infrared spectrometry, thermogravimetric analysis (TGA), and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). The r...
متن کاملEffect of temperature, heating rate and zeolite-based catalysts on the pyrolysis of high impact polystyrene (HIPS) waste to produce fuel-like products
Pyrolysis of high impact polystyrene (HIPS) waste has been investigated under different process parameters, such as temperature, heating rate and types of zeolitic catalysts to produce valuable liquid products. Liquid, gas and coke as products of pyrolysis and aromatic, naphthene, olefin and paraffin as liquid components were obtained and their molecular weight distributions were studied with c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of chromatographic science
دوره 17 5 شماره
صفحات -
تاریخ انتشار 1979