Current–Voltage Characterization of Individual As-Grown Nanowires Using a Scanning Tunneling Microscope
نویسندگان
چکیده
Utilizing semiconductor nanowires for (opto)electronics requires exact knowledge of their current-voltage properties. We report accurate on-top imaging and I-V characterization of individual as-grown nanowires, using a subnanometer resolution scanning tunneling microscope with no need for additional microscopy tools, thus allowing versatile application. We form Ohmic contacts to InP and InAs nanowires without any sample processing, followed by quantitative measurements of diameter dependent I-V properties with a very small spread in measured values compared to standard techniques.
منابع مشابه
Non-lithographic Fabrication of Ni-se Heterojunction Nanowires and their Electrical Characterization
In this paper, heterojunction nanowires of Ni-Se are fabricated via template-assisted electrodeposition process. Nanowires are characterized by scanning electron microscopy (SEM), Energy dispersive X-Ray Spectroscopy (EDS), X-ray diffractometry and electrical transport studies. SEM photographs reveal the uniform and dense growth of Ni-Se nanowires. X-ray diffraction pattern shows the crystallin...
متن کاملPreparation and Characterization of Tin Oxide Nanowires
The aim of this research is preparation of SnO2 nanowires by means of Thermal chemical reaction vapor transport deposition (TCRVTD) method from SnO powders. The morphology, chemical composition and microstructure properties of the nanowires are characterized using field emission scanning electron microscope (FE-SEM), EDS, and XRD. The XRD diffraction patterns reveal that the SnO2 nanowires have...
متن کاملFabrication and characterization of metallic nanowires
The shape of metallic constrictions of nanoscopic dimensions ~necks! formed using a scanning tunneling microscope is shown to depend on the fabrication procedure. Submitting the neck to repeated plastic deformation cycles makes it possible to obtain long necks or nanowires. Point-contact spectroscopy results show that these long necks are quite crystalline, indicating that the repeated cycles o...
متن کاملCharacterization of Metallic Nanowires by Combining Atomic Force Microscope (AFM) and Scanning Electron Microscope (SEM)
A new experimental method is introduced in order to characterize the mechanical properties of metallic nanowires. An accurate mechanical characterization of nanowires requires simultaneous imaging using scanning electron microscope (SEM) and mechanical testing with an atomic force microscope (AFM). In this study, an AFM is located inside an SEM chamber in order to establish the visibility of th...
متن کاملStudy of the Piezoelectric Power Generation of ZnO Nanowire Arrays Grown by Different Methods
The piezoelectric power generation from ZnO nanowire arrays grown on different substrates using different methods is investigated. ZnO nanowires were grown on n-SiC and n-Si substrates using both the high-temperature vapor liquid solid (VLS) and the low-temperature aqueous chemical growth (ACG) methods. A conductive atomic force microscope (AFM) is used in contact mode to defl ect the ZnO nanow...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 13 شماره
صفحات -
تاریخ انتشار 2013