Deformation Energy for Size Functions

نویسندگان

  • Pietro Donatini
  • Patrizio Frosini
  • Claudia Landi
چکیده

Size functions are functions from the real plane to the natural numbers useful for describing shapes of objects. They allow to translate the problem of comparing shapes to the problem of comparing functions, that is a much simpler task. In order to perform the comparison between size functions we present a method to measure the energy necessary to deform size functions into each other. Minimizing such an energy allows for a measure of the similarity between shapes. Some experimental results concerning the comparison of free hand-drawn sketches are shown.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigation of Pre-buckling Stress Effect on Buckling Load Determination of Finite Rectangular Plates with Circular Cutout

This paper investigates the buckling of finite isotropic rectangular plates with circular cutout under uniaxial and biaxial loading. The complex potential method is used to calculate the pre-buckling stress distribution around the cutout in the plate with finite dimensions. To satisfy the in-plane boundary conditions, the generalized complex-potential functions are introduced and a new method b...

متن کامل

Investigation of the Size Effect on the Nano-beam Type Piezoelectric Low Power Energy Harvesting

In this paper, size dependent beam type peizoelectric energy hardvester is investigated. For this goal, first nonlinear formulation of isotropic piezoelectric Euler-Bernoulli nano-beam is developed based on the size-dependent piezoelectricity theory then special beam type piezoelectric energy hardvester is probed for different parameters. Basic nonlinear equations of piezoelectric nano-beam are...

متن کامل

Free Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories

In the present study, a vibration analysis of functionally graded rectangular nano-/microplates was considered based on modified nonlinear coupled stress exponential and trigonometric shear deformation plate theories. Modified coupled stress theory is a non-classical continuum mechanics theory. In this theory, a material-length scale parameter is applied to account for the effect of nanostructu...

متن کامل

Superplasticity of a fine-grained Mg–1.5 wt% Gd alloy after severe plastic deformation

The strain rate sensitivity (SRS) of Mg–1.5 wt% Gd processed by conventional extrusion and 2 passes of simple shear extrusion (SSE) was investigated by shear punch testing. Shear punch tests were conducted at initial shear strain rates in the range of 0.003–0.3 s-1 and at temperatures in the range of 573–773 K. A fine-grained microstructure with an average grain size of about 2.5 µm, obtained a...

متن کامل

Microstructural Evolution of X45CrNiW189 Valve Steel During Hot Deformation

The hot compression tests were carried on X45CrNiW189 valve steel (X45) in the temperature range of 1000– 1200 °C and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperature softening behavior of this steel. For the exact prediction of flow stress, the effective stress-effective strain curves were obtained from experiments under various conditions. On the basis of experi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1999