Demodulators for a Zero-IF Bluetooth Receiver
نویسندگان
چکیده
This brief presents low-complexity detectors for a zero-IF Bluetooth receiver based on a simple phase-domain analog-to-digital converter. Measurements and simulations prove that the detectors’ sensitivity lies close to an ideal coherent Gaussian frequency-shift keying (GFSK) detector.
منابع مشابه
A (simplified) Bluetooth Maximum a Posteriori Probability (map) Receiver
In our software-defined radio project we aim at combining two standards: Bluetooth and HiperLAN/2. The HiperLAN/2 receiver requires the most computation power in comparison with Bluetooth. We choose to use this computational power also for Bluetooth and look for more advanced demodulation algorithms such as a Maximum A posteriori Probability (MAP) receiver. This paper discusses a simplified MAP...
متن کاملBluetooth Low Energy Controller Low IF GFSK Modem
This paper presents the implementation of Bluetooth Low Energy Controller (BTLE), Low Intermediate Frequency (IF), Gaussian Frequency Shift Keying (GFSK) Modulation and Demodulation technique. The GFSK modulation uses a bandwidth bit period product BT=0.5. The modulation index shall be configurable between 0.45 and 0.55. A binary one shall be represented by a positive frequency deviation, and a...
متن کاملDemodulating with the LMX2240 150 MHz IF Receiver
The applications for the LMX2240 IF Receiver are discussed. Practical limitations of high frequency IF demodulators are examined, and methods to cope with these limitations are introduced. Specifically, methods to reduce the susceptibility to oscillation are given, and include layout considerations as well as circuit implementations. In addition, the demodulator tank circuit is examined in deta...
متن کاملUniversal receivers with side information from the demodulators: an example for nonselective Rician fading channels
We consider binary orthogonal signaling over a nonselective Rician-fading channel with additive white Gaussian noise. The received signal over such a channel may have both a specular component and a scatter (Rayleigh-faded) component. If there is only a scatter component, the noncoherent receiver is optimal. If there is only a specular component, the optimal receiver is the coherent receiver. I...
متن کاملBluetooth demodulation algorithms and their performance
In our Software Defined Radio SDR project we aim at combining two different types of standards, Bluetooth and HiperLAN/2 on one common hardware platform. Goal of our project is to generate knowledge about designing the front end of an SDR system (from the antenna signal to the channel bit stream) where especially an approach from both analog and digital perspective is essential. Bluetooth uses ...
متن کامل