Modeling Simulation and Fabrication of Fiber Optic Pressure Sensor Probe
ثبت نشده
چکیده
Elastic element mechanical pressure gages consisting diaphragm are basically used for the differential pressure measurement. In FODPS, diaphragm acts as a reflector. A flexible disc of plastic is used as a diaphragm to convert the measuring pressure to the deflection of diaphragm. Concentric corrugations are designed to linearise the deflections according to pressure. Reference and measuring pressures are applied to control and experimental headspaces respectively. As the pressure changes in the experimental head space, the diaphragm is deform and displaces, and distance between fiber tip and plane of diaphragm changes and thus resultant reading is proportional to the differential pressure.
منابع مشابه
Modeling Simulation and Fabrication of Fiber Optic Pressure Sensor Probe
Elastic element mechanical pressure gages consisting diaphragm are basically used for the differential pressure measurement. In FODPS, diaphragm acts as a reflector. A flexible disc of plastic is used as a diaphragm to convert the measuring pressure to the deflection of diaphragm. Concentric corrugations are designed to linearise the deflections according to pressure. Reference and measuring pr...
متن کاملA fiber optic sensor for measuring glucose in aqueous solutions
In this paper, the set-up of a multi-mode fiber optic sensor for measuring glucose in aqueous solutions is investigated and evaluated. The basis of this sensor is based on the Fresnel Reflection. In this setup, a helium-neon laser is used as a light source, a fiber optic probe, photocell as detector and a digital multimeter. The statistical analysis of the recorded data shows a highly linear be...
متن کاملFabrication and Characterization of SPR Based Fiber Optic Probe Using e beam Deposition
A surface plasmon resonance based fiber optic probe has been fabricated using electron beam deposition. The fabricated probe has been characterized using sucrose solution. It has been observed that the resonance wavelength i.e. SPR wavelength increases with increasing concentration of sucrose solution. The experimental results so obtained have been compared with theoretically simulated model re...
متن کاملDesign and Simulation of piezorestive pressure sensor for AFM Probe the displacement measurement
investigating pressure applied in surface vertically that is done by use of mechanical procedures isn’t efficient to measure pressure applied in inner surface of reservoir or pipes having gas due to entering pressure into whole walls and different surfaces. So, in order to measure this kind of pressure, several studies were conducted in past decades and also various procedures were proposed tha...
متن کاملFiber - Optic Sensing of Linear Thermal Expansion (RESEARCH NOTES)
The use of a LED fiber-optic sensor to measure displacement and linear thermal expansion is described. It has a sensitivity of about 0.6 mV/mm, a resolution of 1.25 mm, and a dynamic rang of 400 mm for displacement measurements. For thermal expansion, it shows a sensitivity of about 3.5 mV/C, and the experimental linear expansion values are in agreement with those calculated. The reported senso...
متن کامل