In Vitro Evaluation and Comparison of the Translucency of Two Different All-Ceramic Systems.

OBJECTIVES The aim of this study was to evaluate and compare the translucency of two different all-ceramic systems using Vita Easyshade digital shade matching device in an in vitro model. MATERIALS AND METHODS Translucency of lithium disilicate glass-ceramic (IPS e.max Press) and zirconia all-ceramic system (Ceramill ZI) were evaluated and compared. A total of 5 square-shaped specimens with 0.5 mm thickness were fabricated from each ceramic system in A1 shade according to Vitapan Classical shade tab. Specimens were then veneered and glazed with corresponding veneer ceramics recommended by each system manufacturer and the total thickness was set to 1.5 mm. Translucency was evaluated using VITA Easyshade in two stages: before and after veneering and glazing on black and white background. Translucency parameter (TP) was calculated. A one-way ANOVA and Bonferonni tests were used when appropriate (α=0.05). RESULTS Lithium disilicate glass-ceramic was significantly more translucent than the zirconia system in both stages (P<0.05). Translucency of all specimens was significantly decreased after veneering and glazing in both all-ceramic systems (P<0.05). CONCLUSION The translucency of two different dental ceramics was significantly influenced by both material and stages of preparation. Within the limitations of the experiment, these results can be valuable and help the clinician to make appropriate esthetic decisions.