Direct and Indirect Control Strategies of DSTATCOM Power Factor Controller
نویسنده
چکیده
The device analyzed in this paper is Distribution STATic COMpensator (DSTATCOM). The objective is to focus on the power factor control with the two different control strategies i.e., Indirect and Direct Control Strategies. This paper presents a study about the control strategies of DSTATCOM device and their impact on the dynamic performance of distribution network. Simulation results were presented to illustrate and understand the reliability and robustness of these control strategies in the system response to load variations.
منابع مشابه
Comparative Power Quality Analysis of Different DSTATCOM Topologies
This paper presents the three topologies of three-phase four-wire DSTATCOM for reduction of harmonics, reactive power compensation, increasing power factor, which occur due to a nonlinear load, environment problem and polluted grid. The performances of the above topologies have been compared for the magnitude of source current, power factor improvement, DC-link voltage regulation, and total har...
متن کاملPower Quality Improvement of Three-phase four-wire DSTATCOM with Fuzzy logic Controller
The topology and control of three-phase 4-wire DSTATCOM consisting of a operating flexibility in the DSTATCOM consisting of a operating flexibly in the voltage or current control mode. In the voltage control DSTATCOM topology includes three single-phase voltage source converters connected in parallel. The proposed DSTATCOM provides the voltage regulation of power factor correction along with ha...
متن کاملPower Quality Improvement using DSTATCOM for Small Isolated Alternator feeding Distribution System
This paper demonstrates a perfect controlled DSTATCOM model with a small isolated distribution system to improve power quality of the system in which a linear/nonlinear three-phase load is fed by a small alternator. A hysteresis rule based carrier-less PWM current controller is used to control the DSTATCOM. Three leg IGBT based PWM-VSI is used as VSC with a capacitor in its parallel working as ...
متن کاملDifferent Types of Pitch Angle Control Strategies Used in Wind Turbine System Applications
The most common controller in wind turbine is the blade pitch angle control in order to get the desired power. Controlling the pitch angle in wind turbines has a direct impact on the dynamic performance of the machine and fluctuations in the power systems. Due to constant changes in wind speed, the wind turbines are of nonlinear and multivariate system. The design of a controller that can ad...
متن کاملDesign and Simulation of Fuzzy Logic controller for DSTATCOM In Power System
Abstract In this paper design of self tuned fuzzy set theory based PI controller is incorporated in typical FACTS device DSTATCOM. Its effects are tested in power systems. The modeling and the controller block diagram for DSTATCOM with detailed design of self tuned fuzzy logic controller is presented. The performance of proposed fuzzy logic DSTATCOM has been simulated for current balancing and ...
متن کامل