Phase relations in the Nb–Ni–Cr system at 1,100 °C

نویسندگان

  • Alexander A. Kodentsov
  • Frans J. J. van Loo
چکیده

ABSTRACT The isothermal cross section through the ternary phase diagram Nb-Ni-Cr at 1,100 °C was constructed by means of diffusion couples and equilibrated alloys. It was found that nearly 28 at.% of Cr can be dissolved in the μ phase (Nb7Ni6) at this temperature, and the solubility of chromium in NbNi3 is approximately 5 at.%. Under these circumstances the low-temperature (cubic) modification of the NbCr2 Laves phase can dissolve up to 6 at.% of nickel, but further increase of the Ni content (up to approximately 10 at.%) stabilizes the hexagonal (high-temperature) modification of the Laves phase. The presence of this pseudo-ternary compound which is in equilibrium with all binary intermetallics and body-centred cubic (BCC) Nb- and Cr-based solid solutions largely determines the topology of the isotherm at 1,100 °C. The formation of this phase was also observed in the reaction zone between Nb and Ni-Cr solid solution when chromium concentration exceeded 15 at.%. GRAPHICAL ABSTRACT

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Determining the Hot Deformation Temperature Range of Medium Carbon Ni-Cr-Mo Low Alloy Steels using Hot Tensile and Hot Torsion Tests

The aim of this study was to investigate the suitable temperature range for hot deformation of three medium carbon Ni-Cr-Mo low alloy steels by hot tensile and hot torsion tests. Hot tensile tests were carried out in the te,prature range of 850-1150°C at a constant strain rate of 0.1 s-1 until fracture. Then, the tensile flow behavior, hot ductility and microstructural evolution of the steels w...

متن کامل

The Effect of Nickel Increasing and Aluminum Addition on Sulfidation Resistance of Fe-Ni-Cr Alloys (TECHNICAL NOTE)

In this research the effects of; increasing the amount of nickel and adding aluminum to create and prolong sulfidation resistance of Fe-Ni-Cr alloys have been investigated. Sulfidation tests were carried out at 1100°C in S/O bearing atmosphere. Prior to the tests, the specimens were annealed in argon at 1250°C for 8 hrs. Weight changes were measured and corroded deposits were analyzed byscannin...

متن کامل

Effect of bonding temperature on the microstructure and electrochemical corrosion behavior of TLP ‎bonded AISI 304L stainless steel

Transient liquid phase (TLP) bonding of AISI 304L stainless steel was carried out using BNi-2 amorphous interlayer. The microstructure of the joint area was studied by using optical and scanning electron microscopes and energy dispersive spectroscopy. The effect of bonding temperature (1030-1110 °C) was studied on the microstructure and corrosion behavior of the TLP bonded samples. Electrochemi...

متن کامل

Effect of bonding temperature on the microstructure and electrochemical corrosion behavior of TLP ‎bonded AISI 304L stainless steel

Transient liquid phase (TLP) bonding of AISI 304L stainless steel was carried out using BNi-2 amorphous interlayer. The microstructure of the joint area was studied by using optical and scanning electron microscopes and energy dispersive spectroscopy. The effect of bonding temperature (1030-1110 °C) was studied on the microstructure and corrosion behavior of the TLP bonded samples. Electrochemi...

متن کامل

Predictions of the Pt(8)Ti phase in unexpected systems.

The binary A(8)B phase (prototype Pt(8)Ti) has been experimentally observed in 11 systems. A high-throughput search over all the binary transition intermetallics, however, reveals 59 occurrences of the A(8)B phase: Au(8)Zn(dagger), Cd(8)Sc(dagger), Cu(8)Ni(dagger), Cu(8)Zn(dagger), Hg(8)La, Ir(8)Os(dagger), Ir(8)Re, Ir(8)Ru(dagger), Ir(8)Tc, Ir(8)W(dagger), Nb(8)Os(dagger), Nb(8)Rh(dagger), Nb(...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 143  شماره 

صفحات  -

تاریخ انتشار 2012