Low Melt Viscosity Resins for Resin Transfer Molding
نویسنده
چکیده
منابع مشابه
Eliminating Volatile-Induced Surface Porosity During Resin Transfer Molding of a Benzoxazine/Epoxy Blend
We studied the mechanism of volatile-induced surface porosity formation during the resin transfer molding (RTM) of aerospace composites using a blended benzoxazine/epoxy resin, and identified reduction strategies based on material and processing parameters. The influence of viscosity and pressure on resin volatilization were determined. Then, in situ data was collected during molding using a la...
متن کاملInvestigation of Parameters Effect Resin Movement Velocity at Vacuum Assisted Resin Transfer Molding Method (VARTM)
In this paper, Vacuum Assisted Resin Transfer Molding (VARTM) method was simulated by analytical solution. Then the effect of parameters like fiber density, distribution of layer thickness, perform layer thickness, resin viscosity was investigated theoretically. Obtained results show that by selecting optimum distribution layer thickness, increasing fiber volume fraction, reducing viscosity of ...
متن کاملInvestigation of Parameters Effect Resin Movement Velocity at Vacuum Assisted Resin Transfer Molding Method (VARTM)
In this paper, Vacuum Assisted Resin Transfer Molding (VARTM) method was simulated by analytical solution. Then the effect of parameters like fiber density, distribution of layer thickness, perform layer thickness, resin viscosity was investigated theoretically. Obtained results show that by selecting optimum distribution layer thickness, increasing fiber volume fraction, reducing viscosity of ...
متن کاملEffect of Deep Penetration of Interleaf on Delamination Resistance in GFRP
The problem of improving the delamination resistance and toughness of laminate fiberreinforced composites especially for the drop-off structure is receiving considerable attention with the increasing need and application in industries. A hot melt-bonding process is developed to bond glass fabric laminates and the thermoplastic (TP) polysulfone (PSU) interleaf prior to the vacuum assisted resin ...
متن کاملNon-Polluting Composites Repair and Remanufacturing for Military Applications: Co-Injection Resin Transfer Molding
Vacuum-assisted resin transfer molding (VARTM) processes have been proven to be cost-effective manufacturing techniques for large composite structures. However, their use has been limited to single resin systems. A large variety Of composite structures requires multiple resins to serve different purposes while being integrated into a single structure. Significant environmental cost savings are ...
متن کامل