Capacitance Level Measurement Basics
ثبت نشده
چکیده
In the four previous parts of this series of articles, level measurement using a floating system, using pressure instruments, using radar waves and using ultrasonic waves were discussed. The instruments offered by Indumart company applicable for each method were also recommended. In the final part of this article, level measurement using capacitance, conductivity probes, vibration forks, thermal dispersion and optical technics are discussed.
منابع مشابه
Ultrasonic Level Measurement Basics
In part one of this series of articles, level measurement using a floating system was discusses and the instruments were recommended for each application. In the second part of these articles, level measurement with the aid of pressure instruments was discussed. In the third part of this series of articles, radar level measurement basics and parameters affecting its efficiency were explained an...
متن کاملThe Effects of Excitation Signal on the Resolution of the Liquid Crystal Capacitive Chemical and Biological Sensors
In this paper excitation characteristics of the Liquid Crystal (LC) capacitive chemical and biological sensor are examined and the optimum frequency and voltage range for the sensor interface are introduced. Interdigitated capacitor has been used for the sensor capacitance measurement and two different molecular orientations, homeotropic and homogenous, have been considered. The LC sensor capac...
متن کاملMetrology and Measurement Systems
This paper addresses the use of capacitive measurement principles for process instrumentation. A brief review on capacitance-based sensors to measure industrial process parameters is provided. A capacitance-to-digital conversion system developed at the Sensors Group at our Institute is presented. Applications of capacitancebased process instrumentation for moisture sensing, flow velocity determ...
متن کاملCalibration of Capacitance Standards with a Quadrature Bridge
− National Metrology Institutes employ the quadrature bridge in the traceability chain to derive the farad from the ohm (represented with the quantum Hall effect). The bridge calibrates the capacitance product of the two capacitors being measured; a separate measurement with a ratio bridge is usually required to estimate each capacitor independently. We describe here a method which, by measurin...
متن کاملMulti-interface Level Sensors and New Development in Monitoring and Control of Oil Separators
In the oil industry, huge saving may be made if suitable multi-interface level measurement systems are employed for effectively monitoring crude oil separators and efficient control of their operation. A number of techniques, e.g. externally mounted displacers, differential pressure transmitters and capacitance rod devices, have been developed to measure the separation process with gas, oil, wa...
متن کامل