Effect of confinement pressure on bearing capacity of two samples of square and strip footing (numerical study)
نویسنده
چکیده
This paper presents the results of modeling tests of the Effect of Confinement Pressure on footing bearing capacity of two kinds of square and strip footing. Footings bearing capacity depends upon many factors including soil kind, depth, form and kind of loading. Soil behavior is variable regarding the kind of loading and the kind of deformations in that can have great importance in the amount of bearing capacity. The kind of deformations depends on the amount of pressure on soil in the past and present. Therefore, studying the role of stress way, which is subject to the amount of confinement pressure on soil, will have an important role in identifying soil behavior. In this study, primarily the effect of confinement pressure on the cohesion and friction angle is studied. Then the effect of both on the bearing capacity with the Meyerhof and Terzaghi methods is evaluated. By using Plaxis software, changes of shearing resistance parameters of both samples different Confinement pressures are studied and bearing capacity of two kinds of square and strip footing has been computed and compared. This study indicated that the amount of bearing capacity by increasing lateral pressure increased, and this increasing is more in grain soil than cohesion one.
منابع مشابه
Behavior of Model Circular Footings on Silty Soils with Cellular Supports
An experimental study of the effect of silt and influence of cell confinement on the bearing capacity of circular footings on silty sand was carried out. Laboratory experiments on clean sand and sand containing silt up to 25 % were performed. Cells with different heights and diameters were used to confine the silty sand. The effect of proportion of silt in sand, cell diameter, cell height and t...
متن کاملSeismic Bearing Capacity of Strip Footings on Pile-Stabilized Slopes
This paper develops an analytical method to calculate seismic bearing capacity of a strip footing, which is located on a slope reinforced with rows of pile. The resistance of passive pile is determined based on normal and shear stress of the soil around the pile, which is then compared to other analytical methods. This comparison indicates an acceptable agreement. The variants of the study incl...
متن کاملEffect of Fuzzy Boundaries on the Bearing Capacity of Footings on Two-Layered Clay
In this study, fuzzy logic was implemented to formulate the fuzziness of layer boundaries for a two-layered clay soil. A field of two-layered clay with fuzzy boundaries between layers was generated, and then the bearing capacity of strip footing on this field was calculated by the assumption of plane-strain conditions. The Mohr-Coulomb failure criterion was used and bearing capacity calculation...
متن کاملExperimental and Numerical Modeling of the Effect of Groundwater Table Lowering on Bearing Capacity of Shallow Square Footings
The lowering of the groundwater table causes the area above the water table to become unsaturated and capillary phenomena to appear in this zone. This means that the bearing capacity of shallow footings will be influenced by capillary stress or matric suction. In this research, the effect of groundwater table lowering on the bearing capacity of a shallow square model footing on dense sand has b...
متن کاملBearing Capacity of Triangular Shell Foundations Adjacent to the Reinforced Sandy Slopes
This paper investigates response of triangular shell strip footings situated on the sandy slope. A series of reduced-scale plate load tests were conducted to cover different parameters including three shell footing types with different apex angles in addition to a flat footing, four different distances for strip footings from the crest of the slope namely “edge distance” and reinforcement statu...
متن کامل