Effects of exercise intensity on clot microstructure and mechanical properties in healthy individuals.

نویسندگان

  • N A Davies
  • O Llwyd
  • J V Brugniaux
  • G R Davies
  • C J Marley
  • D Hodson
  • M J Lawrence
  • L A D'Silva
  • R H K Morris
  • K Hawkins
  • P R Williams
  • D M Bailey
  • P A Evans
چکیده

BACKGROUND Exercise is well established to lead to exercise-induced hypercoagulability, as demonstrated by kinetic coagulation markers. It remains unclear as to whether exercise-induces changes lead in clot development and increased polymerisation. Fractal dimension (df) has been shown to act as a marker of clot microstructure and mechanical properties, and may provide a more meaningful method of determining the relationship between exercise-induced hypercoagulability and potential clot development. METHODS df was measured in 24 healthy individuals prior to, after 5min of submaximal exercise, following maximal exercise, 45min of passive recovery and following 60min of recovery. Results were compared with conventional markers of coagulation, fibrinolysis and SEM images. RESULTS Significantly increased df was observed following exercise, returning to resting values following 60min of recovery. The relationship between df and mature clot microstructure was confirmed by SEM: higher df was associated with dense clots formed of smaller fibrin fibres immediately following exercise compared to at rest. Conventional markers of coagulation confirmed findings of previous studies. CONCLUSION This study demonstrates that df is a sensitive technique which quantifies the structure and properties of blood clots following exercise. In healthy individuals, the haemostatic balance between coagulation and fibrinolysis is maintained in equilibrium following exercise. In individuals with underlying vascular damage who participate in exercise, this equilibrium may be displaced and lead to enhanced clot formation and a prothrombotic state. df may therefore have the potential to not only quantify hypercoagulability, but may also be useful in screening these individuals.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The effects of chemical composition variations on microstructure and mechanical properties of nanostructured, low temperature bainitic steels

Bainitic transformation at low transformation temperatures leads to a microstructure involving fine plates of bainitic ferrite and thin films of retained austenite. This microstructure has shown ultimate tensile strength of about 2.2 GPa, noticeable uniform elongation in the range of 5 to 30%, hardness values of about 600 to 670 HV and impact toughness in the range of 30 to 40 MPa m1/2. With ca...

متن کامل

Effects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts

The effects of friction stir processing (FSP) on the microstructure and mechanical properties of aluminum powder metallurgy (PM) parts was investigated. PM parts were then subjected to FSP at advancing speeds (v) of 40-200 mm/min and tool rotational speeds (ω) of 800-1600 rpm. Microhardness (HV) and tensile tests at room temperature were used to evaluate the mechanical properties of the frictio...

متن کامل

تمرینات FATmax، بهترین نوع تمرین ورزشی برای بهبود ترکیب چربی‌های بدن

Background: Overweight and obesity, as physical disorders, can threaten health in different ways. Regular exercise (training) is defined as an improving factor for body composition and cardiorespiratory fitness in overweight and obese people. However, the intensity of exercise, as one of the training principles, for attaining the highest fat burning effect, is still challenged. This paper revie...

متن کامل

The Effects of Mould Materials on Microstructure and Mechanical Properties of Cast A356 Alloy

Abstract In this study, the effects of mould materials on microstructure and mechanical properties of cast A356 Al alloy were investigated. The alloy was poured into three different moulds. Then the samples were homogenised and applied T6 heat treatment. The optical, Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) studies were made. Secondary dendrite arm spacing (SD...

متن کامل

FSP pass number and cooling effects on the microstructure and properties of AZ31

In this study, the effects of passes number and cooling during friction stir processing (FSP) on the microstructure and properties of AZ31 magnesium alloy has been investigated. The process was carried out at tool rotational speed, transverse speed and tool tilt angle of 1100 rpm, 52 mm/min, and 3°, respectively. Cooling was performed by water. The microstructure of FSPed samples was explored b...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Thrombosis research

دوره 143  شماره 

صفحات  -

تاریخ انتشار 2016