Fabrication and Characterization of Nickel Nanowires
نویسنده
چکیده
This paper shows that nickel nanowires of length 11μm and diameters 800 and 15nm were grown within the pores of nuclear track polycarbonate membrane by electrodepositing nickel. Surface morphology and crystallographic structure of the deposited nanowires was investigated using SEM, TEM and XRD respectively. It is found that low current density gives good result, while high current density leads to the formation of curled nanowires. Fabricated nanowires were further investigated for electrical properties and found that nanowires obey ohm’s law. Through structural characterization it has been observed that the fabricated nanowires posses FCC lattice structure.
منابع مشابه
Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Nanofiltration Membrane Modified by Iron-Nickel Oxide Nanoparticles
In this study, a mixed matrix polyethersulfone/iron-nickel oxide nanoparticle nanofiltration membrane was prepared by the solution casting technique. Polyvinylpyrrolidone was also used as a membrane pore former in membrane fabrication. The effect of iron-nickel oxide nanoparticles concentration in the casting solution on the membrane structure and performance was investigated. Scanning...
متن کاملFabrication and Electrochemical Characterization of Polyvinyl Chloride Based/Chitosan-co- Iron Nickel Oxide Nanoparticles Composite Heterogeneous Cation Exchange Membranes
In this research, polyvinylchloride based composite heterogeneous cation exchange membranes were prepared by the solution casting technique. Chitosan-co-iron nickel oxide nanoparticles were utilized as membrane surface modifier to improve the membranes electrochemical properties. The effect of additive nanoparticle concentration in the modifier solution on the properties of composite membranes ...
متن کاملElectrochemical fabrication of Cu/Pd multilayer nanowires in polycarbonate template
In this work,copper/palladium (Cu/Pd) multilayer nanowires were successfully prepared by electrodeposition method using polycarbonate template. The fabrication of Pd/Cu multilayer nanowires was controlled by analyzing the current–time transient during electrodeposition using potentiostat. The morphological properties of the nanowires were studied by scanning electron microscopy (SEM) and resu...
متن کاملEffect of additives on electrochemical deposition of nickel nanowires
In the last decade, the deposition of metallic nanowires with magnetic properties proved to be an attractive field due to the wide range of potential applications; one can prepare nanowires with exotic properties, like anisotropic or giant magnetoresistance [1-3], which are suitable as building blocks in the development of devices such as magnetic field sensors or nonvolatile RAM memories. In t...
متن کاملInvestigation and Comparison of Optical Properties of Nickel Nanowires and Nickel Thin Film Using He-ne Laser
Ni nanowires are synthesized by template based electrochemical technique. A commercially available filter membrane of alumina anodic oxide (AAO) is used for the fabrication of nanowires. AAO membrane supported on copper substrate yields better hexagonal nanowires. Morphological studies of nanowires are carried out using scanning electron microscopy (SEM). The analysis shows the fabrication of v...
متن کامل