Thermal behaviour of stirred yoghurt during cooling in plate heat exchangers
نویسندگان
چکیده
In this study, CFD calculations were made in order to analyse the thermal behaviour of yoghurt in a plate heat exchanger, the yoghurt viscosity being described by a Herschel–Bulkley model. The influence of Reynolds number on local Nusselt numbers was analysed as well as the influence of entry effects on average Nusselt number. Numerical runs considering and discarding the influence of temperature on the viscosity were performed and the impact on average Nusselt numbers was analysed. Transversal variations of viscosity were studied and thermal correlations including the ratio between bulk and wall viscosities are proposed. The obtained thermal correlations were compared with the experimental ones (described in the literature) and a very good agreement was found, mainly when considering the effect of temperature on viscosity. Simulations with a non-Newtonian fluid having lower Prandtl numbers than yoghurt were performed in order to analyse the influence of this variation on the Reynolds number exponent of the thermal correlation. 2005 Published by Elsevier Ltd.
منابع مشابه
Heat transfer and rheology of stirred yoghurt during cooling in plate heat exchangers
In the present work an experimental investigation was conducted to obtain a correlation for the determination of convective heat transfer coefficients of stirred yoghurt in a plate heat exchanger. A rheological study was carried out in order to characterise the stirred yoghurt flow behaviour, evaluating its dependency both on shear rate and temperature. A shift in the temperature dependency was...
متن کاملSimulation of stirred yoghurt processing in plate heat exchangers
In the present work, simulations of stirred yoghurt processing in a plate heat exchanger were performed using computational fluid dynamics (CFD) calculations and the results compared with experimental data, showing a very good agreement. A Herschel–Bulkley model for the viscosity and an Arrhenius-type term for the temperature dependence were used to model the thermo-rheological behaviour of yog...
متن کاملImplementation of Nanofluids in Plate Heat Exchanger: a Review
Nanofluids are colloidal suspensions of nanosized particles in the conventional base fluid such as water, engine oil and ethylene glycol. The nanoparticles include the chemically stable metals, metal oxides and nonmetallic. In the present study, the literature available on the applications of nanofluids in plate heat exchanger have been compiled and reviewed. However, this paper elaborates the ...
متن کاملNumerical study of heat pipe application in heat recovery systems
Heat pipes, as two-phase heat transfer devices with extremely high effective thermal conductivity. They can be cylindrical or planar in structure. Heat pipes can be embedded in a metal cooling plate, which is attached to the heat source, and can also be assembled with fin stack for fluid heat transfer. Due to the high heat transport capacity, heat exchangers with heat pipes have become much sma...
متن کاملThe effect of hemispherical chevrons angle, depth, and pitch on the convective heat transfer coefficient and pressure drop in compact plate heat exchangers
Plate heat exchangers are widely used in industries due to their special characteristics, such as high thermal efficiency, small size, light weight, easy installation, maintenance, and cleaning. The purpose of this study is to consider the effect of depth, angle, and pitch of hemispheric Chevrons on the convective heat transfer coefficient and pressure drop. In the simulation of the heat ex...
متن کامل