On the aeroacoustic tonal noise generation mechanism of a sharp-edged plate.
نویسندگان
چکیده
This letter presents an experimental study on the tonal noise generated by a sharp-edged flat plate at low-to-moderate Reynolds number. Flow and far-field noise data reveal that, in this particular case, the tonal noise appears to be governed by vortex shedding processes. Also related to the existence of the tonal noise is a region of separated flow slightly upstream of the trailing edge. Hydrodynamic fluctuations at selected vortex shedding frequencies are strongly amplified by the inflectional mean velocity profile in the separated shear layer. The amplified hydrodynamic fluctuations are diffracted by the trailing edge, producing strong tonal noise.
منابع مشابه
Empirical study of the tonal noise radiated by a sharp- edged flat plate at low-to-moderate Reynolds number
Airfoils operating at low-to-moderate Reynolds number may produce noise that contains one or more high amplitude tonal components. Many previous researchers have attributed airfoil tonal noise to a feedback loop between instabilities in the laminar boundary layer and the acoustic waves produced at the trailing edge. There is, however, limited experimental evidence to verify this proposed hypoth...
متن کاملAn experimental study of airfoil instability tonal noise with trailing edge serrations
This paper presents an experimental study of the effect of trailing edge serrations on airfoil instability noise. Detailed aeroacoustic measurements are presented of the noise radiated by an NACA-0012 airfoil with trailing edge serrations in a low to moderate speed flow under acoustical free field conditions. The existence of a separated boundary layer near the trailing edge of the airfoil at a...
متن کاملAeroacoustic Testing of Open Rotors at Very Small Scale
This study examines the potential of very-small-scale experiments to simulate the acoustics of large scale counter-rotating open rotors in isolation and with a rectangular-plate shield. The experimental rotor model was based on the historical F7/A7 design developed by General Electric. The 80-mm diameter rotors were fabricated using advanced stereolithography and were powered by two high-perfor...
متن کاملA Numerical Study on the Aeroacoustic Radiation from a Finite Length Rotating Cylinder
Rotating cylinders have wide applications in different areas, especially the aerodynamic area. However, the acoustic behaviors of these components have not been widely studied. The generating noise from a spinning cylinder is mainly due to the detached vortices from the leeward of the body. In this study, the large eddy simulation technique is used to simulate the flow field over a three-dimens...
متن کاملNumerical study on the acoustic field of a centrifugal fan and the tonal noise sources
The widespread use of squirrel cage fans, especially in ventilation and home and industrial environments, has led to the formation of many research efforts to improve performance and reduce the sound produced by this type of fan. In the literature, the most important factor in generating sound in this category of fans is the confrontation between the rotor exit flow and the volute of the fan. I...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Journal of the Acoustical Society of America
دوره 129 4 شماره
صفحات -
تاریخ انتشار 2011