Tribological studies of polyphenylene sulfide composites filled with micro/nano particles and reinforced with short fibers or carbon nano-tubes/carbon nano-fibers
نویسندگان
چکیده
منابع مشابه
Nano and Micro PTFE for Surface Lubrication of Carbon Fabric Reinforced Polyethersulphone Composites
Abstract Carbon fibre/fabric (CF) is a privileged reinforcement for advanced polymer composites in tribological applications where performance is primary criteria rather than the cost due to the combination of distinct properties such as high specific strength, thermo-oxidative resistance, thermal and electrical conductivity along with self-lubricity etc. However problems associated with its ch...
متن کاملFinite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites
An effort is made to gain insight on the effect of carbon nanotubes (CNTs) on the impact response of carbon fiber reinforced composites (CFRs) under low velocity impact. Certain amount of CNTs could lead improvements in mechanical properties of composites. In the present investigation, ABAQUS/Explicit finite element code (FEM) is employed to investigate various damages modes of nano composites ...
متن کاملMetal Matrix Composites Reinforced by Nano-Particles—A Review
Metal matrix composites reinforced by nano-particles are very promising materials, suitable for a large number of applications. These composites consist of a metal matrix filled with nano-particles featuring physical and mechanical properties very different from those of the matrix. The nano-particles can improve the base material in terms of wear resistance, damping properties and mechanical s...
متن کاملEffect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملHybrids of Polystyrene-b-Poly(ethylene-ran-butylene)-b- Polystyrene Reinforced by Electrospun Polyimide/ Carbon Nanotube Nanofibers: Preparation and Properties
Using electrospinning technique, well-aligned poly(azo-ether-imide) (PAEI) nano-fibers and PAEI/multiwalled carbon nanotube (MWCNT) nano-fibers were developed in this effort. Afterwards, polystyrene-b-poly (ethylene-ran-butylene)-b-polystyrene (SEBS) and polyimide-based nano-fiber films were casted. The as-prepared electrospun nanofibers acted as homogeneous reinforcement to enhance the tensile...
متن کامل