An Adiabatic Power-Supply Controller For Asynchronous Logic Circuits
نویسنده
چکیده
Adiabatic logic can offer significant power reductions in comparison to conventional CMOS circuits ([1], [2]). Although numerous architectures have been proposed in the literature for synchronous circuit implementations, not much work has been done on asynchronous logic due to the difficulties of such implementations. This paper presents a new adiabatic power supply controller for asynchronous circuits which attempts to improve on previous asynchronous adiabatic approaches.
منابع مشابه
Design of Low Power VLSI Circuits using Energy Efficient Adiabatic Logic
Abstract—In this paper, a new design of adiabatic circuit, called energy efficient adiabatic logic (EEAL) is proposed. Earlier various diode based adiabatic logic families have been proposed. To achieve minimum energy consumption, this paper proposes a technique in which diode is replaced by MOS transistor at charging and discharging path whose gate is controlled by the power clocks. By using t...
متن کاملDesign and Analysis of Full Adder Using Adiabatic Logic
Power dissipation is an increasing concern in VLSI circuits. New logic circuits have been developed to meet these power requirements. Power dissipation can be minimized by using various adiabatic logic circuits. In this paper an Adder circuit has been proposed based on 2PASCL and ECRL logic and then compared with Positive Feedback Adiabatic Logic(PFAL), Two-Phase Adiabatic Static Clocked Logic(...
متن کاملDesign of Sequential Circuit using Low Power Adiabatic Complementary Pass Transistor Logic
Adiabatic logic style is Proving to be an attractive solution for low power digital design. The paper investigates low – power characteristics of complementary pass -transistor logic (CPL) circuits using AC power supply. The two-phase power-clock scheme is more suitable for the design of flip-flops and sequential circuits because it uses fewer transistors. The Adiabatic flip-flop have large ene...
متن کاملEfficient power clock generation for adiabatic logic
Practical issues in the design of power clock generators needed by adiabatic logic circuits are explained. Synchronous and asynchronous power clock generators are designed for an 8-bit adiabatic carry look-ahead adder and the more energy efficient circuit for the power clock generation is determined to be the 2N synchronous power clock generator that exhibits conversion efficiency of 77% at 1 o...
متن کاملLow Power Combinational and Sequential Circuits with Adiabatic Complementary Pass-Transistor Logic (ACPL)
This paper presents low-power characteristics of adiabatic complementary pass-transistor logic (ACPL) using four-phase AC power supply. Adiabatic CPL circuits consist of pure NMOS transistors, use CPL blocks for evaluation and bootstrapped NMOS switches to eliminate non-adiabatic loss of output loads. In this paper, combinational circuit (4-bit ripple carry adder) and sequential circuit (4-bit ...
متن کامل