Novel Desorber for Online Drilling Mud Gas Logging
نویسندگان
چکیده
This work presents the construction solution and experimental results of a novel desorber for online drilling mud gas logging. The traditional desorbers use mechanical mixing of the liquid to stimulate transfer of hydrocarbons to the gaseous phase that is further analyzed. The presented approach is based on transfer of hydrocarbons from the liquid to the gas bubbles flowing through it and further gas analysis. The desorber was checked for gas logging from four different drilling muds collected from Polish boreholes. The results of optimization studies are also presented in this study. The comparison of the novel desorber with a commercial one reveals strong advantages of the novel one. It is characterized by much better hydrocarbons recovery efficiency and allows reaching lower limits of detection of the whole analytical system. The presented desorber seems to be very attractive alternative over widely used mechanical desorbers.
منابع مشابه
Automated Classification System for Petroleum Well Drilling Using Mud-logging Data
During the petroleum well drilling operation many mechanical and hydraulic parameters are observed by an instrumentation system installed in the rig named mud-logging system. The mud-logging system is composed by several sensors distributed in the rig; these sensors measure different operation parameters like: hook load, column rotation, mud pit level, pumping pressure, etc. The mudlogging syst...
متن کاملRaptor Codes for Real-time Mud Pulse Telemetry in M/lwd System
The Measurement/Logging While Drilling (M/LWD) system is a kind of sensors system which is used to help oil/gas drilling field technicians to steer well drilling. In M/LWD, several kinds of sensors are installed into drill string to measure the underground logging data during well drilling operations, and a sink within the drill string collects the logging data from the sensors and then transmi...
متن کاملA Crossplot for Mud Logging Interpretation of Unconventional Gas Shale Reservoirs and its Application
The drilling time data of gas logging are used to calculate drilling time ratio of the reservoir, and the total hydrocarbon data are used to calculate hydrocarbon contrast coefficient and to establish the drilling time ratio--hydrocarbon contrast coefficient crossplot. The standards of distinguishing the boundaries of hydrocarbon zones, hydrocarbonaceous water layers and dry layers are determin...
متن کاملDPCM Compression for Real-Time Logging While Drilling Data
Logging while drilling (LWD) is a drilling technique which obtains and transmits the logging data during oil/gas drilling operations. Because of the limited available transmission bandwidth of mud channel, how to improve the bandwidth utilization becomes a critical problem in LWD research. In this paper, by discussing the information entropy of real logging data, we find that the original encod...
متن کاملReal-time drilling mud gas monitoring for qualitative evaluation of hydrocarbon gas composition during deep sea drilling in the Nankai Trough Kumano Basin
BACKGROUND Integrated Ocean Drilling Program Expedition 338 was the second scientific expedition with D/V Chikyu during which riser drilling was conducted as part of the Nankai Trough Seismogenic Zone Experiment. Riser drilling enabled sampling and real-time monitoring of drilling mud gas with an onboard scientific drilling mud gas monitoring system ("SciGas"). A second, independent system was ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
دوره 2016 شماره
صفحات -
تاریخ انتشار 2016